丁磊，沈金，干钢

（浙江大学建筑设计研究院， 杭州 310028）

 

［摘要］长兴县行政服务中心工程采用了竖向构件较少落地的大型复杂箱形转换结构。基于确定的抗震性能化设计目标，分别采用振型分解反应谱法、弹性时程分析和pushover分析方法对该工程进行抗震性能研究。根据计算分析结果对转换层结构采用型钢混凝土梁及上下两层混凝土楼板组成的型钢混凝土箱形转换结构，使其在满足建筑造型的同时能达到“小震不坏、中震可修、大震不倒”的抗震设防要求，保证结构足够的安全性，实现了抗震性能化设计目标。

［关键词］超限高层； 箱形转换结构； 性能化设计； 平面不规则； 竖向不规则

中图分类号：TU398      文献标识码：A      文章编号：1002-848X(2013)15-0027-04

 

Ding Lei, Shen Jin, Gan Gang

 (Architectural Design and Research Institute of Zhejiang University, Hanzhou 310028, China)

 

Abstract: The large and complex high-rise structure with box transfer story, vertical members with less ground are employed for Changxing Government Affair Service Center. The seismic performance design objective was determined, and then the seismic performance studies were conducted by response spectrum analysis, elastic time-history analysis and pushover analysis respectively. To achieve three-level performance target of “no damage under minor earthquake, repairable under moderate earthquake, no collapsing under major earthquake”, the box transfer structure with steel reinforced concrete beam and two-layer concrete floors are employed for the structure.Through above series of research, the seismic performance design objective is realized for the building.

Keywords: High-rise structure; box transfer story; seismic performance design; plane irregularity; vertical irregularity

作者简介：丁磊，硕士，工程师，Email：delacroix3649@163.com。

 

［1］唐兴荣. 高层建筑转换层结构设计与施工［M］. 北京：中国建筑工业出版社，2002.

［2］钟和平. 带箱形转换层高层建筑结构抗震分析与设计［D］.重庆：重庆大学，2006.

［3］JGJ 3—2010高层建筑混凝土结构技术规程［S］. 北京：中国建筑工业出版社，2011.

［4］JGJ 99—98高层民用建筑钢结构技术规程［S］. 北京：中国建筑工业出版社，1998.

［5］GB 50011—2010建筑抗震设计规范［S］. 北京：中国建筑工业出版社，2011.