李贤，沙士钰，吕恒林，周淑春

（中国矿业大学土木工程环境灾变与结构可靠性江苏省重点试验室， 徐州 221116）

［摘要］建议了FRP(纤维增强塑料)布环向约束钢筋混凝土偏心受压柱的简化轴力弯矩相关曲线（NuMu曲线）的建立方法，参照《混凝土结构设计规范》（GB 50010—2010）的正截面承载力计算基本假定，得到了简化NuMu曲线的关键控制点，并通过相关试验结果验证了采用简化NuMu曲线验算FRP布环向约束钢筋混凝土偏心受压柱承载力的合理性，并给出了利用简化NuMu曲线进行FRP布环向约束加固钢筋混凝土偏心受压柱的设计流程以及设计建议。研究结果表明，通过该简化曲线可以较好地计算FRP布环向约束钢筋混凝土偏心受压柱的承载力，且计算过程简单，能够满足工程结构加固设计要求，为我国相关规范的修订提供有益参考。

［关键词］钢筋混凝土柱； 纤维增强塑料； 承载力； 偏心荷载； 加固设计

中图分类号：TU3181文献标识码：A文章编号：1002848X(2013)12004705

Study on simplified NuMu interaction curve for FRP jacketed rectangular

reinforced concrete columns under eccentric loading

Li Xian, Sha Shiyu, Lü Henglin, Zhou Shuchun

（Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Civil Engineering,

China University of Mining and Technology, Xuzhou 221116, China)

Abstract:The purpose of this study is to propose a new method for the construction of a simplified axial force\|bending moment interaction curve（NuMu interaction curve） for

fiber reinforced polymer(FRP) jacketed reinforced concrete columns under eccentric loading. Based on the assumptions recommended by Code for design of concrete structures (GB 50010—2010) for calculating flexural strength of conventional reinforced concrete members, the key points to determine the simplified curve were obtained and then the accuracy of the proposed curve was verified by examining correlations with the experimental results found in literatures. The calculation procedure and some recommendations for structural strengthening were also suggested. Analytical results indicate that the proposed curve can accurately and effectively predict the loading capacity of FRP jacketed reinforced concrete columns, and thus it can be applied in engineering practice and revision of future codes in related field.

Keywords:reinforced concrete column; fiber reinforced polymer (FRP); loading capacity; eccentric loading; strengthening design

*国家自然科学基金（51008300），江苏省自然科学基金（BK2010185）。

作者简介：李贤，副教授，硕士生导师，Email：leexian@yeah.net。

参考文献

［1］GB 50367—2006混凝土结构加固设计规范［S］. 北京：中国建筑工业出版社，2006.

［2］CECS 146：2003碳纤维片材加固混凝土结构技术规程［S］. 2007年版. 北京：中国计划出版社，2007.

［3］曹双寅，敬登虎，孙宁. 碳纤维布约束加固混凝土偏压柱的试验研究与分析［J］. 土木工程学报, 2006, 39(8): 2632.

［4］ELMAADDAWY T. Strengthening of eccentrically loaded reinforced concrete columns with fiber reinforced polymer wrapping system: experimental investigation and analytical modeling［J］. Journal of Composites for Construction, 2009, 13(1): 1324.

［5］ELMAADDAWY T, ELSAYED M, ABDELMAGID B. The effect of crosssectional shape and loading condition on performance of reinforced concrete members confined with Carbon FiberReinforced Polymers［J］. Materials and Design, 2010, 31(5): 2330 2341.

［6］ACI 4402R08 Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures［S］. Farmington Hills, MI, USA: American Concrete Institute, 2008.

［7］ROCCA S, GALATI N, NANNI A. Interaction diagram methodology for design of FRPconfined reinforced concrete columns［J］. Construction and Building Materials, 2009, 23(4): 15081520.

［8］GB 50010—2010混凝土结构设计规范［S］. 北京：中国建筑工业出版社，2011.

［9］WU G, WU Z S, L Z T. Designoriented stressstrain model for concrete prisms confined with FRP composites［J］. Construction and Building Materials, 2007, 21(5): 11071121.

［10］WU Y F, WANG L M. Unified strength model for square and circular concrete columns confined by external jacket［J］. Journal of Structural Engineering, 2009, 135(3): 253261.