赵金钢，占玉林，赵人达，邵俊虎

（西南交通大学土木工程学院, 成都 610031）

 

［摘要］为探讨高速铁路拱桥实体圆钢吊杆的抗疲劳性能和承载能力，设计并制作了一根短吊杆和一根长吊杆足尺模型，进行了200万次疲劳试验和承载能力试验。参考《铁路桥梁钢结构设计规范》(TB 10002.2—2005)和英国规范BS 5400的有关规定，基于Miner疲劳损伤累积原则，得到了吊杆的等效荷载幅值。研究结果表明：在设计疲劳荷载循环加载200万次后，吊杆模型杆体和连接细节部位未出现疲劳裂纹，应力状态稳定，实体圆钢吊杆疲劳性能满足设计要求；疲劳试验后静力拉伸试验表明，短吊杆和长吊杆疲劳后静力性能满足设计要求，极限承载力分别为6 180kN和5 610kN。

［关键词］实体圆钢吊杆；疲劳试验；承载能力；高速铁路桥梁

中图分类号：U448.25      文献标识码：A      文章编号：1002-848X(2013)10-0026-05

 

Model test for fatigue behavior and load bearing capacity of solid round steel hanger in high-speed railway bridge

Zhao Jingang, Zhan Yulin, Zhao Renda, Shao Junhu

(School of Civil Engineering, Southwest Jiaotong Universitiy, Chengdu 610031, China)

 

Abstract: In order to investigate the fatigue behavior and load bearing capacity of the solid round steel hanger in high-speed railway arch bridge, the full scale models of a short and a long solid round steel hangers were designed and manufactured. The fatigue test models were firstly subjected to cyclic loads up to 2 million times and then load bearing capacity tests were carried out. According to Miner’s fatigue accumulation damage rule and referring to the Code for design on steel structure of railway bridge (TB 10002.2—2005) and British Code BS 5400, the equivalent load amplitude of the hanger models was determined. The fatigue test results show that no crack occurs in the body and connection structural detail of the short and the long hanger models, the fatigue behavior of the short and the long solid round steel hangers can meet the design requirement. The static tensile test results show that the static behavior of the short and the long solid round steel hangers can meet the design requirement after 2 million times of cycle loading. The ultimate load bearing capacities of the short and long hanger are 6 180kN and 5 610kN respectively.

Keywords: solid round steel hanger; fatigue test; load bearing capacity; high-speed railway bridge

*高等学校博士学科点专项科研基金资助课题（20090184120033），西南交通大学科技发展基金（2009QK04）。

作者简介：赵金钢，博士研究生，Email:zhaojingangtumu@163.com。

 

参考文献

［1］张玉玲,潘际炎.高速铁路钢桥疲劳设计研究［J］.钢结构，1999,14(3):1-3.

［2］陈列,郭建勋,李小珍.高速铁路钢系杆拱桥［M］.北京：中国铁道出版社，2010.

［3］TB 10002.2—2005铁路桥梁钢结构设计规范［S］.北京：中国铁道出版社,2005.

［4］BS 5400 Steel, concrete and composite bridges—part10: code of practice for fatigue［S］. British Standard Institution，1980.

［5］Eurocode 3 Design of steel structures［S］. European Committee for Standardization，2003.

［6］美国国家高速公路和交通运输协会.美国公路桥梁设计规范［S］. 辛济平,万国朝，译.北京：人民交通出版社，1998.

［7］刘彦明.大跨度钢箱叠拱桥实体圆钢吊杆疲劳试验研究［J］.兰州交通大学学报，2010,29(3):7-11.

［8］张辉.下承式钢管混凝土拱桥吊杆受力分析［D］.西安：西安建筑科技大学，2009.