您现在的位置:建筑结构>> 期 刊>> 2013年>> 第01期>>正文内容
型钢混凝土T形柱受剪性能及承载力计算*
张向冈,陈宗平,郑述芳,苏益声,梁荣耀
摘 要
张向冈,陈宗平,郑述芳,苏益声,梁荣耀
( 广西大学土木建筑工程学院, 南宁 530004)
 
[摘要]为了研究型钢混凝土(SRC)T形柱斜截面抗剪承载性能,设计了4个试件进行静力单调加载试验,考虑了剪跨比、轴压比、配钢形式、翼缘尺寸4个变化参数,通过试验观察了试件的受力全过程和破坏形态。根据实测数据,给出了混凝土应变沿截面高度的分布情况以及荷载应变、荷载挠度等重要关系曲线;并分析了各变化参数对抗剪承载力的影响,提出了承载力计算公式。研究结果表明:型钢混凝土T形柱受力过程中截面应变基本符合平截面假定;剪跨比、轴压比、配钢形式、翼缘尺寸等参数对其抗剪强度有显著影响;基于叠加法的抗剪强度计算公式可用于其斜截面极限承载力计算。
[关键词]型钢混凝土;T形柱;受剪性能;强度计算
中图分类号:TU398        文献标识码:A        文章编号:1002-848X(2013)01-0054-05
 
Research on shear performance and bearing capacity calculation method of T-shaped steel reinforced concrete columns
Zhang Xianggang, Chen Zongping, Zheng Shufang, Su Yisheng, Liang Rongyao
(College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China)
 
Abstract: In order to study the shear bearing capacity of inclined section in T-shaped steel reinforced concrete(SRC) columns, 4 specimens with different shear span ratios, axial compression ratios, steel form and flange dimension were designed and produced to carry out monotonic static shear loading test. The whole loading process and failure pattern were watched and the curves of concrete strain distribution along cross section height, load-strain and load-deflection were drawn based on the measured data. The impact of parameters on the shear capacity was analyzed, and the formula for calculating capacity was proposed. It is shown that average strain of T-shaped section conforms to plane section assumption. Shear span ratios, axial compression ratios, steel form and flange dimension have significant effect on the shear strength. The calculation formula of shear strength can be used to calculate ultimate bearing capacity of inclined section.
Keywords: steel reinforced concrete; T-shaped column; shear performance; strength calculation
*国家自然科学基金(50908057),广西科学基金(桂科青0832004)
通讯作者:陈宗平,博士,教授,Email:zpchen@gxu.edu.cn
 
参考文献
[1]赵鸿铁. 钢与混凝土组合结构[M]. 北京:科学出版社, 2001.
[2]徐亚丰,刁晓征,王鑫. 十字形实腹式钢骨混凝土异形柱非线性分析[J]. 建筑结构,2010,40(7):96-98.
[3]CHENG-TZU,THOMAS HSU. Biaxial loaded I-shaped reinforced concrete columns[J]. Journal of Structural Engineering, 1985,111(12):2576-2595.
[4]陈宗平,薛建阳,赵鸿铁,等. 低周反复荷载作用下型钢混凝土异形柱的抗剪承载力分析[J]. 土木工程学报,2007,40(7):15-21.
[5]周建中. 钢筋混凝土不等肢L形截面异形柱正截面承载力的试验及理论研究[D]. 南宁:广西大学, 2000.
[6]严孝钦. 异形柱纵筋最小配筋率和保护层厚度对矩形柱承载力影响[D]. 天津:天津大学, 2000.
[7]胡飞鹏. 桁架式钢骨混凝土异形柱[D]. 南宁:广西大学, 2006.
[8]JGJ 149-2006 混凝土异形柱结构技术规程[S]. 北京:中国建筑工业出版社, 2006.
下载地址

    你还没注册?或者没有登录?这篇论文要求至少是本站的注册会员才能阅读!

    如果你还没注册,请赶紧点此注册吧!

    如果你已经注册但还没登录,请赶紧点此登录吧!