您现在的位置:建筑结构>> 期 刊>> 2009年>> 增刊02期>>正文内容
基于变形控制的基础设计
周兰翎,张超,莫世英,姜 勇
摘 要

周兰翎,张超,莫世英,姜  勇
(中南建筑设计院,武汉430070)

[摘要] 针对武汉康桥小区场区内复杂的地质条件,采取同一结构单元中端承桩和端承摩擦桩共同受力的桩基础方案。以正常使用荷载(即单桩承载力特征值)作用下桩基沉降变形相等为原则确定单桩承载力特征值并完成桩基础设计。连续的沉降观测结果表明,建筑物整体沉降均匀,符合国家规范要求。本工程的基础设计思路和方法可为同类复杂地质条件下的基础设计提供有益的参考。
[关键词] 变形控制;端承桩;端承摩擦桩;共同受力

    Foundation design based on deformation control
    Zhou Lanling, Zhang Chao, Mo Shiying, Jiang Yong
    (Central-South Architectural Design Institute, Wuhan 430070, China)

Abstract: According to the complicated geological conditions in Kangqiao Courtyard in Wuhan, it introduces a formula of pile foundation by joint load carrying in both end bearing pile and end bearing friction pile in the same structural block. The principle to determine the eigenvalue of bearing capacity of single pile and accomplish the foundation design is that, the settlements in different pile foundation by the action of the regular service load (called eigenvalue of bearing capacity of single pile) are equal. The observation result of continuous settlement indicates that there is a uniform settlement across the whole construction, and it can meet the national code demand. The idea and method of the foundation design in this project are helpful to be referenced by similar foundation design in complicated geological conditions.
Keywords: deformation control; end bearing pile; end bearing friction pile; joint load carrying

下载地址

    你还没注册?或者没有登录?这篇论文要求至少是本站的注册会员才能阅读!

    如果你还没注册,请赶紧点此注册吧!

    如果你已经注册但还没登录,请赶紧点此登录吧!