您现在的位置:建筑结构>> 期 刊>> 2009年>> 增刊01期>>正文内容
涂装工厂大跨度移动网架屋面的设计
张 晶,王 琦
摘 要

    张  晶,王  琦
    (中船第九设计研究院工程有限公司,上海200063)

[摘要] 本文介绍了采用移动式网架结构形式来满足业主提出的功能要求的设计过程及问题的分析,阐述了移动网架屋面体系的设计思路和设计要点,以及如何利用通用的结构计算软件建立模型,对此类非常规结构类型进行模拟计算,并介绍了此工程竣工投产后的实际使用效果。本文可供今后设计类似的工业建筑时参考。
[关键词] 涂装工厂;移动网架屋面;风荷载;抗侧刚度;计算模型

    Design of a Sandblasting & Coating Workshop with Big-span Moving Grid Roof
   
Zhang Jing, Wang Qi
    ( China Shipbuilding NDRI Engineering Co.,  Ltd. , Shanghai 200063, China)

Abstract: This sandblasting & coating workshop is located in Jiang Su province. According to the producing process of the owner, moving grid roof system should be used in order to hoist components by using adjacent hoisting equipment directly from the roof, to improve the work efficiency. Therefore the design difficulty is much higher than normal workshop with fixed roof. During design process, force analysis should be considered under all kinds of conditions that produced by moving roof system. The stiffness and deformation should meet the requirement to run the moving roof properly. This article presents design process and idea of using moving grid roof system to meet the function requirement, introduces how to establish structure calculation model with general design software, and introduces using effect after construction completion. This article can be used as reference when designing similar construction.
Keywords: sandblasting&coating workshop; moving grid roof; wind load; lateral stiffness, calculation model

下载地址

    你还没注册?或者没有登录?这篇论文要求至少是本站的注册会员才能阅读!

    如果你还没注册,请赶紧点此注册吧!

    如果你已经注册但还没登录,请赶紧点此登录吧!