陈建兵¹，万水²，尤元宝¹，赵文娟¹

（1 苏州科技学院土木工程学院，苏州215011； 2 东南大学交通学院，南京210096）

 

[摘要] 波折开孔板是一种新型钢-混凝土组合梁的连接件，为研究设置有波折开孔钢板连接件的组合梁在静载作用下的受力性能，通过双排波折开孔钢板连接件的钢-混凝土组合梁模型的两点对称加载试验，探讨组合梁截面应变沿梁高的分布及跨中挠度随荷载变化的规律，分析混凝土板与钢梁交界面的界面特性及贯穿钢筋的受力情况、混凝土板的掀起作用等，对比同等条件下具有平板开孔板连接件的组合梁交界面相对滑移性能。结果表明：该组合梁具有良好的抗弯性能,截面应变符合平截面假定；波折开孔钢板连接件具有较高的抗剪能力和连接性能，混凝土与钢梁交界面相对滑移量小，研究结果为波折开孔板连接件在大型组合结构中的应用提供理论基础。

[关键词] 组合梁；波折开孔板；新型连接件；受力性能；试验研究

中图分类号：TU398文献标识码：A文章编号：1002-848X(2012)10-0075-04

 

Chen Jianbing¹, Wan Shui², You Yuanbao¹, Zhao Wenjuan¹

（1 School of Civil Engineering, Suzhou University of Science and Technology, Suzhou 215011, China; 2 School of Transportation, Southeast University, Nanjing 210096, China）

 

Abstract: The corrugated perforated plate is a new type of connector used for steel-concrete composite beams, and experiment was conducted in order to study the mechanical performance of composite beams with symmetrically two-point static loading. Strain distribution in the section along with the height of composite beams and the cross-deflection changing with load were investigated, the performance of the interface of concrete and steel beam, transverse steel and lift of concrete plate performance were analyzed. Furthermore, contractive analysis of the relative slip between new corrugated and flat perforated plate connector was studied in the same condition. The results show that the connector has better flexural properties, and section strain is in line with the assumption of plane section. The corrugated perforated plate connector has high shear ability, connection performance, and the relative slip in interface of concrete and steel beam is little. The research can provide theoretical foundation for the application study of the corrugated perforated plate connector in large composite structure.

Keywords: composite beam;corrugated perforated plate;new connector; mechanical performance; experimental study

*住建部科学技术项目资助(2009-K2-25)，苏州市市级建设科研项目资助（2010-88-04)。

作者简介：陈建兵，副教授，Email:szctt2009@163.com。

 

［1］LEONHART F, ANDRA W, ANDRA H P, et al. Neues vorteihaftes verbundmittel fur stahlverbund-tragwerkemit hoher dauerfestigkeit［J］.Betonund Stahlbetonbau,1987,82(12):325-331.

［2］雷昌龙. 钢-混凝土组合桥中新的剪力连接器的发展与试验［J］. 国外桥梁,1999（2）：64-68.

［3］NISHIUMI K,OKIMOTO M U. Shear strength of perfobondrib shear connector under the confinment［C］//Proceedings of Japan Society of Civil Engineers,1999:193-203.

［4］HOSAKA T,MITSUKI K,HIRAGI H,et al. Study on shear strength equations and design method of perfobond strip［J］.Japanese Journal of Structural Engineering,JSCE,2002,48A（3）：1265-1272.

［5］OGUEJIOFOR E C，HOSAIN M U. Numerical analysis of push-out specimens with perfobond rib connector［J］.Computers and Structures,1997,62（4）：617-624.

［6］胡建华,叶梅新,黄琼. PBL剪力连接件承载力试验［J］.中国公路学报,2006,19（6）：65-72.

［7］刘玉擎,周伟翔,蒋劲松. 开孔板连接件抗剪性能试验研究［J］. 桥梁建设，2006（6）：1-4.

［8］宗周红,车惠民. 剪力连接件静载和疲劳试验研究［J］.福州大学学报：自然科学版,1999,27（6）:61-66.

［9］肖林. 钢-混组合结构中剪力连接件试验研究［D］. 成都：西南交通大学，2008.

［10］万水. 一种翼缘型抗剪连接件:中国，CN201053146［P］.2008-04-30.

［11］李淑琴,万水，陈建兵. 一种新型抗剪连接件试验研究［J］. 桥梁建设,2009（4）：17-19.

［12］代艳杰,刘寒冰,张宏强,等. 预应力钢-轻骨料混凝土简支组合梁承载能力试验研究［J］. 公路，2009（3）：24-28.