刘浩晋¹，王伟^1,2，陈以一^1,2，余亚超³，杨建行³，刘大伟⁴

（1 同济大学建筑工程系，上海 200092；2 同济大学土木工程防灾国家重点实验室, 上海 200092； 3 宝业集团浙江建设产业研究院有限公司，绍兴 312030；4 日本大和房屋工业株式会社，奈良 631-0801）

 

[摘要] 对分层装配式支撑钢结构工业化建筑梁贯通式节点进行了研制改进和性能试验，考察了构造形式和柱轴压力对节点刚度和承载力的影响。试验研究表明，节点失效模式主要表现为梁翼缘发生过大塑形变形和方管柱截面鼓曲，且与节点局部构造和柱轴压力大小有密切关系。所有试件均具有一定的抗弯刚度和承载力，以及较好的延性性能，能够保证柱子在大变形条件下承担一定比例的水平地震力。

[关键词] 分层装配；钢结构；工业化建筑；梁贯通式节点；刚度；延性

中图分类号：TU391文献标识码：A文章编号：1002-848X(2012)10-0053-04

 

Liu Haojin¹, Wang Wei^{1, 2}, Chen Yiyi^{1, 2}, Yu Yachao³, Yang Jianxing³, Liu Dawei⁴

(1 Department of Building Engineering, Tongji University, Shanghai 200092, China; 2 State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China; 3 Zhejiang Construction Industry Research Institute, Baoye Group, Shaoxing 312030, China; 4 Daiwa House Industry Co., Ltd., Nara City 631-0801, Japan)

 

Abstract: Beam through connections were improved and experimentally studied in order to be used in the floor-by-floor assembled steel braced structures for prefabricated buildings. The effects of connection details and the axial compression in the column on the rigidity and strength of the connections were investigated. Test results show that the failure modes of the joints significantly depend on the connection details and axial compression in the column, demonstrating excessive plastic deformation of beam flanges or plastic local buckling of tube column. All the joints are found to have certain bending rigidity and moment resistance with favorable ductility, which can ensure that the columns participate in resisting horizontal seismic force under the conditions of large story drift.

Keywords: floor-by-floor assembling; steel structure; prefabricated building; beam through connection; rigidity; ductility

*中央高校基本科研业务费专项资金，上海市浦江人才计划。

通讯作者：王伟，博士，副教授，Email：weiwang@tongji.edu.cn。

 

［1］王伟，陈以一，余亚超，等. 分层装配式支撑钢结构工业化建筑体系［J］. 建筑结构，2012,42(10):48-52.

［2］GB 50011—2010 建筑抗震设计规范［S］. 北京：中国建筑工业出版社，2010.

［3］Eurocode 3 Design of steel structures, part 1-8: design of joints［S］. Brussels: European Committee for Standardization, 2005.