1)南昌大学建筑工程学院，南昌，330029；2)井冈山学院，吉安，343009；3)南昌航空工业学院土建系，南昌，330034。
【提要】进行了5个足尺异形柱框架顶层边节点受剪性能的试验研究。对核心区开裂、02mm裂缝，屈服、极限、破坏阶段的裂缝开展，梁纵筋及节点箍筋屈服乃至节点破坏的特征等进行观察，量测了节点核心、翼缘正面、节点与梁端连接处和箍筋的应变数据，记录了梁端荷载位移曲线。在实测数据的基础上着重分析了各试件的耗能、刚度、延性等抗震性能以及肢长对节点受剪性能的影响。
【关键词】 异形柱框架 顶层边节点 受剪性能 低周反复荷载 抗震性能
Experimental Research on Shear Properties of Top Storey Exterior Beamcolumn Joints in RC Frame Structure with Specialshaped Columns/Gui Guoqing1,2，Xiong Lili3，Xiong Jingang1(1 School of Architecture and Civil Engineering, Nanchang University, Nanchang 330029,China; 2 Jinggangshan University, Ji'an 343009,China;3 Department of Civil Engineering, Nanchang Institute of Aeronautical Technology, Nanchang 330034,China)
Abstract:Five prototype top storey exterior joints in RC frame structure with specialshaped columns are tested. Through the experiment, initial crack, 02mm crack phrase, yielding phrase, extremity and  failure stage are observed.At the same time, the strains of joint concrete, longitudinal reinforcement of beam, wing concrete and stirrup on each phrase are measured, and the beamtip loaddisplacement curve is recorded. On the basis of measured data, the earthquakeresistant characteristics such as energy dissipation, stiffness and ductility are analyzed.
Keywords:RC frame structure; specialshaped columns; top storey; exterior joint;shear
properties; aseismic characteristics