吴广彬，李智斌，刘永颐（中国建筑科学研究院建筑结构研究所，北京 100013）

［摘要］新编行业标准《钢筋锚固板应用技术规程》（JGJ 256—2011）［1］于2012年4月开始实施，简要介绍钢筋锚固板应用技术的新进展、国内外有关钢筋锚固板应用的技术规程情况、规程JGJ 256—2011的主要技术内容以及有关规定的编制背景，为广大设计、施工技术人员更好地理解、掌握和运用新标准提供帮助。

［关键词］钢筋锚固板；行业标准；规程

中图分类号：TU318.4文献标识码：A文章编号：1002-848X(2012)04-0166-05

Introduction of Technical specification for application of headed bars(JGJ 256—2011)

Wu Guangbin, Li Zhibin, Liu Yongyi(Institute of Building Structures, China Academy of Building Research, Beijing 100013, China)

Abstract:The new edited industry standard Technical specification for application of headed bars (JGJ 256—2011)［1］ will be put into execution from April in 2012. In order to help the designer and constructor to understand, master and apply this new standard, the new development of  application and technology of headed bars, the international application standards for headed bars, the main technical points and the editorial background of JGJ 256—2011 were introduced.

Keywords:headed bars; industry standard; specification

作者简介：吴广彬，高级工程师，Email:wuguangbin@cabrtech.com。

参考文献

［1］JGJ 256—2011钢筋锚固板应用技术规程［S］.北京：中国建筑工业出版社，2011.

［2］THOMPSON M K, JIRSA J O, BREEN J E, et al．Anchorage behavior of headed reinforcement: literature review［R］. Austin: Center for Transportation Research Report 1855-1,  2002.

［3］带锚固板钢筋机械锚固性能研究［R］.北京：中国建筑科学研究院，2007.

［4］李智斌．带锚固板钢筋机械锚固性能的试验研究［D］．天津：天津大学，2005.

［5］游宇．混凝土框架顶层端节点中采用钢筋锚固板的试验研究［D］．天津：天津大学，2008．

［6］李辉．带锚固板钢筋在钢筋混凝土框架顶层端节点的应用研究［D］．天津：天津大学，2009．

［7］陈堃．配置500MPa 纵筋采用带锚固板梁内搭接方案的框架顶层端节点抗震性能研究［D］．重庆：重庆大学，2009．

［8］彭辉．配置500MPa 纵筋采用带锚固板柱内搭接方案的框架顶层端节点抗震性能研究［D］．重庆：重庆大学，2009．

［9］GB 50010—2010混凝土结构设计规范［S］.北京：中国建筑工业出版社，2010.

［10］ACI 352R-02 Recommendations for design of beam-column connections in monolithic reinforced concrete structures［S］. Farmington Hills: ACI-ASCE Committee 352, American Concrete Institute,  2002．

［11］ACI 318-08 Building code requirements for structural concrete and commentary［S］. Farmington Hills: American Concrete Institute,  2008．

［12］AASHTO LRFD Bridge design specifications［S］. 2nd ed. Washington D. C.: American Association of State Highway and Transportation Officials,  1998.

［13］ASTM A970/A970M-09 Standard specification for headed steel bars for concrete reinforcement［S］. American Society for Testing and Materials, 2009.

［14］ASTM A1044/A1044M-05 Standard specification for steel stud assemblies for shear reinforcement of concrete［S］. American Society for Testing and Materials, 2005.

［15］CAN 3-A23-3-94 Design of concrete structures for buildings with explanatory notes［S］. Rexdale: Canadian Standards Association,  1994.