(1 西南交通大学土木学院,成都 610031;2 西南科技大学土木工程与建筑学院,绵阳 621010)
［摘要］对采用反向起拱粘贴碳纤维布加固混凝土梁构件的基本原理和设计方法进行了初步研究，提出了基于预应力原理的反拱法碳纤维布材加固梁构件的施工工艺。在此基础上，进行了3根试件的试验。通过试验结果对比了不同加固工艺的受弯构件的开裂荷载、极限荷载、抗弯刚度等工作性能，分析了反拱加固的预应力效应。试验发现，反拱加固试件的开裂荷载较普通粘贴加固试件的开裂荷载提高了36.2%，屈服条件下的变形减小了24.2%。试验结果表明，采用反拱加固可方便有效地卸除加固构件的残余应力，并产生预应力效应，可充分发挥碳纤维布材料高强度的特性，提高构件刚度和承载能力。
［关键词］反拱；预应力；碳纤维布；加固；梁构件
中图分类号：TU375-05文献标识码：A文章编号：1002-848X(2012)03-0104-03
Study of strengthened reinforced concrete beams with additional reversed deflection
Gu Song1, 2, Yao Yong2, Zhao Lei1, Chen Daiguo2（1 School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China; 2 School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang 621010, China)
Abstract:The mechanism of using carbon fiber reinforced plastics (CFRP) sheet to strengthen reinforced concrete beams with additional reversed deflection operation was proposed. Three specimens were tested to investigate the working performance of these beams. The strengthening effects, such as cracking load, ultimate load and flexural stiffness between non-strengthened beams and strengthened beams with either reversed deflection method or traditional method were compared. The effect of pre-stressing caused by reversed deflection was verified through theoretical derivation and experimental results. Compared with the beam strengthened with traditional method, strengthened beam with reversed deflection can enhance the crack load by 36.2%, and the deformation of the beam under yield load can decrease by 24.2%, which means strengthened beam with reversed deflection can unload the residual stress of the beam effectively and cause pre-stress effects, which will utilize more tensile strength of the CFRP and largely improve the performance of the beams.
Keywords:additional reversed deflection; pre-stress; CFRP; strengthened; beam member
*国家863计划资助（2009AA032304）。
作者简介：古松，副教授，Email：gusong@swust.edu.cn。
参考文献
［1］李贵炳,张爱晖,金伟良.钢筋混凝土梁加固时的既有荷载对其抗弯性能的影响［J］.土木工程学报，2006，39(1)：13-20.
［2］王荣国,代成琴,刘文博,等.CFRP加固混凝土梁抗弯极限承载力的计算分析［J］.哈尔滨工业大学学报,2002,34(3):312-319.
［3］王苗春,冯振宇.不同卸载时外贴CFRP加固RC梁正截面承载力计算［J］.石家庄铁道学院学报,2004,17(1):72-75.
［4］王滋军,刘伟庆,姚秋来,等.考虑二次受力的碳纤维加固钢筋混凝土梁抗弯性能的试验研究［J］.工业建筑，2004,34(7):85-87.
［5］尚守平,彭晖,童桦,等.预应力碳纤维布材加固混凝土受弯构件的抗弯性能研究［J］.建筑结构学报,2003,24(5):24-30.
［6］张轲,叶列平,岳清瑞.预应力碳纤维布加固钢筋混凝土T形梁试验研究［J］.工业建筑,2006,36(12):86-95.
［7］赵军让.采用体外预应力技术对钢筋混凝土梁的加固［J］.科技情报开发与经济,2007,17(14):187-188.
［8］刘国义,王守国,陈艳和,等.外部预应力碳化纤维复合缆绳在混凝土梁加固中的应用［J］.国外油田工程,2005,21(11):39-43.
［9］陆春阳.混凝土受弯构件正截面抗裂弯矩计算［J］.广西大学学报:自然科学版,2005，30（3）:181-183