- 摘 要
-
(1 同济大学建筑工程系,上海 200092;2 中国民航机场建设集团公司,北京 110101;3 华东建筑设计研究院有限公司,上海 200002)
[摘要]采用ANSYS有限元软件对四边简支夹层玻璃受弯进行数值分析,并与受弯承载力试验结果比较,研究夹层玻璃的受力特点,进而得出准确的夹层玻璃的力学计算模型。在夹层玻璃承载力试验和大量数值模拟的基础上,与国内外玻璃幕墙规程进行比较,归纳总结出PVB胶片对夹层玻璃承载力的影响程度,对现行《玻璃幕墙工程技术规范》(JGJ 102—2003)中关于夹层玻璃在风荷载等短期荷载作用下的挠度公式进行修正并给出修正系数。
[关键词]夹层玻璃;承载力;试验研究;数值模拟
中图分类号:TU382文献标识码:A文章编号:1002-848X(2012)02-0173-03
Theoretical and experimental study on load bearing capacity of laminated glass simply supported on four sides
Wang Xun1, Zhang Qilin1, Tao Zhixiong1, Chen Jun2, Chen Jun3(1 Department of Building Engineering, Tongji University, Shanghai 200092, China;2 China Airport Construction Group Corporation of CAAC,Beijing 110101, China;3 East China Architectural Design & Research Institute Co., Ltd., Shanghai 200002, China)
Abstract:The laminated glass simply supported on four sides subjected to bending was analyzed using the finite element software ANSYS, and the numerical analysis was compared with the experimental results. Based on the theoretical and experimental results, accurate calculation model was established. On the basis of many finite element analysis of laminated glass and load bearing capacity tests, the formula for calculating maximum displacement of four-sides supported laminated glass in Technical code for glass curtain wall engineering (JGJ 102—2003) was revised and the corresponding revised coefficient was given.
Keywords:laminated glass; load bearing capacity; experimental research; numerical simulation
*国家自然科学基金资助项目(50978195)。
作者简介:王勋,硕士研究生,Email:wangxun_wx@sina.com。
参考文献
[1]张其林.玻璃幕墙结构[M].济南:山东科学技术出版社,2006.
[2]张其林.玻璃幕墙结构设计[M].上海:同济大学出版社,2007.
[3]JGJ 102—2003 玻璃幕墙工程技术规范[S]. 北京:中国建筑工业出版社,2003.
[4]prEN 13474-1-1999 Glass in building-Design of glass panes-Part 1:General basis of design[S]. European Committee for Standardization Draft,1999.
[5]陶志雄,张其林,陈俊,等. 四边简支夹层玻璃受弯承载力试验研究及有限元分析[J].建筑结构学报,2010,31(10):114-119.
[6]王新敏.Ansys工程结构数值分析[M].北京:人民交通出版社,2007.