(1 重庆大学土木工程学院，重庆 400045；2 广东省建筑设计研究院，广州510010；3 青海建筑职业技术学院，西宁 810012；4 甘肃建筑职业技术学院，兰州 730030)
［摘要］ 依托实际工程，采用缩尺模型，对两类含沉板的楼面板进行了短期单调静力荷载下的破坏性试验。对楼面板破坏形态、变形特点、承载能力及特殊构造处理进行了试验研究。结果表明：含沉板的楼面板整体变形特点与普通双向板基本相同。在沉板肋梁交接部位及肋梁与吊梁交接部位，受力复杂，形成薄弱区域。在本试验条件下，各试件在达到承载能力极限状态之前，裂缝宽度和挠度均达到正常使用极限状态控制的限值。最终破坏后，板底均形成了明显的以“X”形为主的塑性铰线，属于双向弯曲破坏，可按塑性理论计算板的极限承载力。配置了冷轧带肋钢筋的楼面板，开裂荷载大于实际工程中作用在楼板上荷载的标准组合值，使该板在正常使用中处于弹性阶段，满足工程实际的需要。
［关键词］沉板；冷轧带肋钢筋；受力性能；试验研究
中图分类号：TU375-2文献标识码：A文章编号：1002-848X（2012）02-0127-06
Experimental study on mechanical behaviors of slab with bathroom concave
Liu Haifeng1,3, Zhang Lei1,4, Huang Huihui2, Sun Ning1, Fu Jianping1(1 College of Civil Engineering, Chongqing University, Chongqing 400045, China；2 The Architectural Design Research Institute of Guangdong Province, Guangzhou 510010, China; 3 Qinghai Architectural Vocational and Technical College, Xining 810012, China；4 Gansu Architectural Vocational and Technical College, Lanzhou 730030, China)
Abstract:Based on the engineering practice, two types of reduced scale models with concave slab were tested under short term static load till failure. Experimental studies were taken to learn the failure modes, deformations, supporting capacities and the details of the specimens. The results indicate that the overall deformation of the floors are similar with RC two-way slabs, complex stress regions and weak parts-appear at the conjunctions of the ribbon beams or at the conjunctions of the ribbon beam and the lifting beam. Before reaching the ultimate limit states, deflections and widths of cracks of all the specimens have reached the service limits. Significant ‘X’ plastic hinge lines occurred on the bottom of the slabs, which indicates that the slabs failed in two-way bending, and the ultimate load can be determined by plasticity theory. Compared with the possible characteristic combinations of engineering practice, the cracking loads of the specimens with cold-rolled deformed bars are much higher, which enables the slabs work elastic under service loads.
Keywords:concave slab; cold-rolled deformed bar; mechanical behavior; experimental study
作者简介：刘海峰，硕士，副教授，Email:lhf_xn@163.com。
参考文献
［1］叶金伟,李君. 浅谈住宅卫生间的排水设计［J］.开封大学学报,2009,23(4):95-96
［2］王志远,魏链,蓝宗建.带局部凹槽楼板结构受力及变形的研究［J］.建筑结构,2003,33(1):20-24.
［3］刘会军,霍文营,余蕾,等.楼板中下沉式板受力性能研究［J］.建筑结构,2011,41(4):101104.
［4］李国胜.混凝土结构设计禁忌及实例［M］.北京:中国建筑工业出版社,2006:126.
［5］GB 50009—2001建筑结构荷载规范［S］.北京 :中国建筑工业出版社,2002.