您现在的位置:建筑结构>> 期 刊>> 2012年>> 第02期>>正文内容
《建筑抗震设计规范》在多高层钢结构房屋抗侧力构件连接构造规定中存在的安全问题
刘其祥1,陈青来2,陈幼璠1
摘 要

(1 中国建筑标准设计研究院, 北京 100044; 2 山东大学, 济南 250061)
[摘要]新颁布的《建筑抗震设计规范》(GB 50011—2010)在“钢框架结构的抗震构造措施”中所推荐的框架梁与柱的现场连接和框架柱与梁悬臂段的连接,是属于弱连接构造而非强连接构造。分析了造成差错的根本原因,指出了规范中推荐的连接构造和采用的极限承载力计算公式均存在缺陷。用极限承载力计算方法验证了规范推荐的上述连接抗力不足,存在安全隐患。据此,提出了加强连接的构造做法及其相应的计算建议。
[关键词]抗震设计;钢结构;抗侧力;屈服强度;抗拉强度;强屈比;连接的极限承载力
中图分类号:TU391文献标识码:A文章编号:1002-848X(2012)02-0107-06
Safety problems-of lateral force resistance joint construction about multi-story and tall steel structures in Code for seismic design of buildings
Liu Qixiang1, Chen Qinglai2,Chen Youfan1(1 China Institute of Building Standard Design & Research, Beijing 100044,China; 2 Shandong University, Jinan 250061,China )
Abstract: The frame beam and column-connections and frame column and cantilever beam connections recommended by-Code for seismic design of buildings (GB 50011—2010), are not strong but weak joints-Through using the ultimate bearing capacity calculation method, it is verified that the resistance force of the joints above-mentioned is insufficiency and exists hidden safety danger. The fundamental reasons for-errors were analyzed. The connection structure and the formula of the ultimate bearing capacity calculation method recommended by the code have faults. The method of enhancing connect structure and the corresponding calculating suggestion are put forward.
Keywords:seismic design; steel structure; lateral force resistance; yield strength; tensile strength; ratio of strength and yield; ultimate bearing capacity of joint
作者简介:刘其祥,教授级高级工程师,Email:lqx3960@sina.com。
参考文献
[1]GB 50011—2010建筑抗震设计规范[S]. 北京: 中国建筑工业出版社,2010.
[2]刘其祥, 陈青来,陈幼璠. 《建筑抗震设计规范》在多高层钢结构房屋抗侧力构件连接计算规定中隐存的安全问题[J]. 建筑结构,2012,42(1):75-80.
[3]GB/T 19879—2005建筑结构用钢板[S]. 北京: 中国标准出版社,2005.
[4]TAMBOLL AR,FASCE P E.Handbook of structural steel construction design and details[M].McGraw. Hill,2000.
[5]JGJ 99—98高层民用建筑钢结构技术规程[S]. 北京: 中国建筑工业出版社,1998.
[6]日本建筑学会.钢构造接合部设计指针[S]. 2001.
[7]刘其祥,陈幼璠,陈青来. 现行建筑抗震设计规范多高层钢结构梁柱刚性连接设计方法的技术矛盾[J]. 建筑结构,2010,40(6):1-6.
[8]刘其祥,陈幼璠,陈青来. 多高层钢结构梁柱刚性连接耐震型节点形式及计算方法[J].建筑结构,2010,40(6):7-12.
[9]于海丰,张耀春,张文元. 钢结构 “强节点弱构件”抗震设计方法对比分析[J]. 建筑结构,2008,38(7):100-105,112.
[10]刘大海,杨翠如,钟锡根.高层建筑抗震设计[M]. 北京: 中国建筑工业出版社,1993.

下载地址

    你还没注册?或者没有登录?这篇论文要求至少是本站的注册会员才能阅读!

    如果你还没注册,请赶紧点此注册吧!

    如果你已经注册但还没登录,请赶紧点此登录吧!