（1 中南电力设计院，武汉 430071；2 重庆大学土木工程学院，重庆 400044）
［摘要］通过试验对1/4和1/2环形加肋钢管插板连接节点基于钢管控制的极限承载力进行了研究。在此基础上，根据能量理论和虚功原理，提出了适用于估算此类节点极限承载力的分析模型，用数值分析方法得出了节点极限承载力，并与试验结果、有限元和AIJ计算结果进行了比较，证明该理论分析模型的适用性较好。
［关键词］环形加肋；钢管节点；屈服线模型；极限承载力；虚功原理
中图分类号：TU392-3文献标识码：A文章编号：1002-848X(2012)02-0103-04
Analysis on strength of tube-gusset joints in steel tubular tower with annular ribbed plate
Bai Qiang1, Zeng Desen1, Shu Aiqiang1, Li Zhengliang2(1 Central Southern China Electric Power Design Institute, Wuhan 430071, China; 2 Department of Civil Engineering, Chongqing University, Chongqing 400044, China)
Abstract:Experimental study was performed to investigate the behavior and strength of tubegusset joints with 1/4 and 1/2 annular ribbed plate.Based on energy theory and virtual work principle, analysis model for calculating the ultimate bearing capacity of tube-gusset joints was put forward, ultimate bearing capacity of tube-gusset joints was obtained through numerical method. Compared the strength of joint which obtained according to above model with the results of experiment, FEM and AIJ, it is proved that the calculation method model has the theoretical and practical significance for design.
Keywords:annular ribbed plate；steel tubular joint; yield line model; ultimate bearing capacity; virtual work principle
作者简介：白强，硕士，工程师，Email: baiqiang@csepdi.com。
参考文献
［1］输电线路钢管塔制作基准［M］.日本铁塔协会，1985.
［2］钢管构造设计施工指针\5同解说［M］.日本建筑学会，1990.
［3］道路桥示方书.同解说［M］.日本道路协会,1987.
［4］FUNG T C,SOH C K,GHO W M, et al. Ultimate capacity of completely overlapped tubular joints I：An experimental investigation［J］. Journal of Constructional Steel Research, 2001，57（8）： 855-880.
［5］CHIEW S P, SOH C K, FUNG T C, et al. Numerical study of multiplanar tubular DX-joints subject to axial loads［J］. Computers and Structures, 1999，72 (6)： 749-761.
［6］FUNG T C, SOH C K, GHO W M. Ultimate capacity of completely overlapped tubular joints Ⅱ：Behavioural study［J］. Journal of Constructional Steel Research,2001，57 (8)：881-906.
［7］WARDENIER J, KUROBANE Y, PACKER J A, et al. Design guide for circular hollow section(CHS) joints under predominantly static loading［M］. Germany: Verlag TUV Rheinland GmbH, 1991.
［8］LEE CHI KING, TJHEN LIE SENG, PING CHIEW SING, et al. Numerical models verification of cracked tubular T, Y and K-joints under combined loads［J］. Engineering Fracture Mechanics, 2005，72(7)：983-1009.
［9］ELCHALAKANI M, ZHAO X L,GRZEBIETA R H. Plastic mechanism analysis of circular tubes under pure bending ［J］.International Journal of Mechanical Sciences, 2006,44(6):11171143.
［10］ZEINODDINI M, HARDING J E, PARKE G A R. Contribution of ring resistance in the behavior of steel tubes subjected to a lateral impact［J］.International Journal of Mechanical Sciences, 2000,42(12):2303-2320.
［11］郭健, 孙炳楠. 钢管塔中管-板连接节点的破坏全过程分析［J］.工业建筑，2006，36（12）：83-86.
［12］余世策,孙炳楠,叶尹，等.高耸钢管塔结点极限承载力的试验研究与理论分析［J］.工程力学,2004，21（3）：155-161.
［13］吴龙升，孙伟民，张大长. U型插板钢管连接节点承载力特性的非线性有限元分析［J］.南京工业大学学报：自然科学版，2008，30（1）：92-96.
［14］王小丽,翁雁麟,关富玲. X型圆管相贯节点极限承载力分析［J］.市政技术,2006,24(1):34-36.
［15］鲍侃袁，沈国辉，孙炳楠，等. 高耸钢管塔K形结点极限承载力的试验研究与理论分析［J］.工程力学,2008，25（12）：114-122.