(1 大连市建筑设计研究院有限公司，大连116021；2 北京工业大学工程抗震与结构诊治北京市重点实验室,北京100124)
［摘要］大连国际会议中心工程以平面分布不规则的14个筒体为整个工程结构水平和竖向主要支承构件。由于结构形式的特殊性，筒体受力形式有别于传统高层建筑结构中的核心筒。为满足抗震设计及结构连接构造的需要，工程采用内藏带斜支撑型钢桁架混凝土组合筒体，并针对受力特点采取必要的构造措施。为深入研究该筒体性能，结合工程实际进行了缩尺筒体模型抗震试验研究，包括刚度及其退化过程、承载力、延性、抗震耗能能力及破坏特征、构造措施有效性等。根据试验结果，针对试验中薄弱部位采取进一步加强措施，提高筒体抗震能力。研究表明，内藏带斜支撑型钢桁架混凝土组合筒体具有很高的承载能力；内藏钢框架可明显提高筒体承载力、延性，阻止刚度退化；筒体不规则洞口形成薄弱部位，虽然采取若干措施，支撑筒整体承载力仍然有较明显的降低，因此应尽量减少短墙开洞，同一截面处不应开多个洞口。
［关键词］内藏带斜支撑型钢桁架混凝土组合筒体；抗震试验；承载力；破坏特征；设计优化
中图分类号：TU398文献标识码：A文章编号：1002-848X(2012)02-0027-06
Design and test research on the support tube in Dalian International Conference Center
Wang Lichang1，Wang Guolei1，Liu Nan1，Zuo Qinglin1，Cao Wanlin2，Ji Dahai1，Qu Xinfan1 (1 Dalian-Architectural Design & Research Institute Co., Ltd., Dalian 116021, China; 2 Earthquake Engineering and Structural Treatment of Beijing Key Laboratory, Beijing University of Technology, Beijing 100124, China)
Abstract:The structure of Dalian International Conference Center consists of 14 concealed steel frame reinforced concrete transport cylinders resisting the entire building vertical load and horizontal lateral. Due to the peculiar structure of the cylinder, the force is different from the traditional structure of the high-rise building of the core barrel. In order to meet the aseismic design and-connection construction of structure , the hide inside with inclined brace steel truss concrete composite cylinder-was used in this project, and-tectonic measures were taken according to the necessary stress characteristics. For the further study of the cylinder performance, the scale cylinder model experiment was studied on the seismic behavior combined with practical engineering, including its stiffness and deterioration process, bearing capacity, ductility, energy dissipation capacity, failure characteristics and tectonic measures effectiveness. Based on the test results, further measures were taken for the test of weak parts in the engineering in order to improve the seismic capacity of cylinder. Research shows that inside with inclined brace steel frame reinforced concrete combined cylinder has-high bearing capacity. Concealed steel frame can obviously improve the cylinder bearing capacity, ductility, stiffness degradation of cylinder block. Irregular hole forms a weak position, although a number of measures are taken, the bearing capacity of support tube is still obviously decreased. Therefore, minimizing openings in the short wall is necessary and the same section should not have more than one hole.
Keywords:hide inside with inclined brace steel truss concrete composite cylinder;  seismic test; bearing capacity; failure characteristics; design optimization
作者简介：王立长，教授级高级工程师，Email:wang19490621@sina.com。
参考文献
［1］王立长，曲鑫蕃，纪大海，等. 大连国际会议中心结构设计研究综述［J］.建筑结构,2012,42(2):1-6.
［2］王立长，李东方，韩光翔，等.大连国际会议中心结构分析［J］.建筑结构,2012,42(2):7-14.
［3］侯光瑜，陈彬磊，苗启松，等. 钢混凝土组合框架核心筒结构设计研究［J］. 建筑结构学报，2006，27(2)：1-9.
［4］史庆轩,侯伟，刘飞，等. 钢筋混凝土核心筒抗震性能试验研究［J］.建筑结构学报,2011,32(10):123-133.
［5］舒兴平,刘小山，卢倍嵘，等. 带偏心支撑的高层钢框架混凝土核心筒结构的抗震性能研究［J］.湖南大学学报,2009,36(8):7-11.
［6］曲鑫蕃，姜拥军，邱旭光，等. 支撑筒角部钢柱抗拔锚固设计试验研究［J］.建筑结构,2012,42(2):66-70.
［7］大连市建筑设计研究院有限公司，北京工业大学.内藏网状钢桁架混凝土组合筒体抗震试验研究报告［R］. 2010.
［8］GB 50011—2001建筑抗震设计规范［S］. 2008年版. 北京:中国建筑工业出版社,2008.
［9］姜波，邱旭光，温海林，等. 开洞的钢板和型钢支撑-混凝土组合剪力墙抗震性能试验研究［J］.建筑结构,2012,42(2):41-44.