(1 苏州科技大学江苏省结构工程重点实验室， 苏州 215011； 2 浙江交通职业技术学院桥隧工程研究所， 杭州 311112)

摘要: 为研究基于胶结￣簇钉混合连接的装配式钢￣混凝土组合结构的受力性能，开展了 8 组共 16 个试件的推出试验，研究了胶结￣簇钉混合连接件的破坏机理、滑移性能、受力次序和抗剪承载力，探讨了栓钉间距、直径和高度对混合连接件抗剪性能的影响。 试验结果表明:混合连接件破坏时试件整体性完好，呈现延性破坏；胶结层先于簇钉承担剪力，胶结层的抗剪性能不可忽视；减小栓钉间距，可提高混合连接件的抗剪承载力，但不能改善其延性；在一定范围内增加栓钉的直径和高度，既可提高混合连接件的抗剪承载力又可改善其延性。 其中，栓钉直径对混合连接件抗剪承载力和延性的影响最为显著。

关键词: 胶结￣簇钉混合连接件； 破坏机理； 滑移； 抗剪承载力； 受力次序； 栓钉

中图分类号:TU398. 7 文献标志码:A 文章编号:1002￣848X(2022)06￣0049￣07

DOI:10. 19701 / j.jzjg.LS210227

Experimental study on failure mechanism and bearing capacity of hybrid connector withbonded￣clustered studs

YUAN Xiaojing1， ZHAO Wei2， LIU Fan1， ZHENG Xinyun1

(1 Key Laboratory of Structural Engineering of Jiangsu Province， Suzhou University of Science and Technology，Suzhou 215011， China； 2 Bridge and Tunnel Engineering Research Institute， Zhejiang Institute of Communications，Hangzhou 311112， China)

Abstract: In order to study the mechanical performance of the fabricated steel￣concrete composite structure based on hybridconnection with bonded￣clustered studs， the failure mechanism， slip performance， order of force and shear capacity ofhybrid connector with bonded￣clustered studs were studied through the push￣out test on 8 groups of 16 specimens. Theinfluence of stud spacing， diameter and height on the shear performance of hybrid connectors were discussed. The testresults show that the integrity of the hybrid connectors is intact when it fails， showing ductile failure； the bonded layer bearsthe shear force before the clustered studs， and the shear resistance of the bonded layer cannot be ignored； reducing the studspacing can improve the shear bearing capacity of hybrid connectors，but it cannot improve the ductility； increasing the studdiameter and height within a certain range can increase both the shear bearing capacity and the ductility of the hybridconnector. Among them， the stud diameter has the most significant impact on shear bearing capacity and ductility of thehybrid connector.

Keywords: hybrid connector with bonded￣clustered stud； failure mechanism； slip； shear bearing capacity； order offorce； stud

∗江苏省建设系统科技项目(2020ZD08)。

第一作者:袁晓静，硕士，实验师，主要从事混凝土结构及组合结构性能研究，Email: xiaojing0318006@ 126.com。

[引用本文] 袁晓静，赵伟，刘凡，等. 胶结￣簇钉混合连接件破坏机理及承载力试验研究[ J]. 建筑结构，2022，52(6):49￣55. YUAN Xiaojing， ZHAO Wei， LIU Fan， et al. Experimental study on failure mechanism and bearing capacityof hybrid connector with bonded￣clustered studs[J]. Building Structure，2022，52(6):49￣55.