(1 浙江理工大学土木工程系， 杭州 310018； 2 华东建筑设计研究院有限公司上海建筑科创中心，上海 200002； 3 浙江华临建设集团有限公司， 杭州 311100； 4 浙江省装配式混凝土工业化建筑工程技术研究中心， 杭州 310018)

摘要: 为了方便现场施工，提出了一种箍筋环扣连接预制混凝土新型叠合梁。 设计制作了不同剪跨比的 4 个预制混凝土叠合梁试件(包括“凹”形和“凸”形叠合梁各 2 个)和 2 个现浇对比梁试件，进行单调集中加载试验。 通过对试件的破坏形式、荷载￣挠度曲线、钢筋应变等进行分析，系统地研究了箍筋制作工艺以及箍筋连接长度等因素对叠合梁受剪性能的影响。 试验结果表明:各试件均发生剪切破坏，环扣连接箍筋能有效传递梁内剪力；“凸”形叠合梁的纵筋应变分布与现浇梁基本一致，“凹”形叠合梁与现浇梁的纵筋应变差异较大；新型叠合梁的破坏荷载和初始刚度分别比现浇梁平均提高约 7%和 4%；“凹”形叠合梁在构件受力性能、制作工艺和现场施工便利性等方面均优于“凸”形叠合梁。

关键词: 预制混凝土叠合梁； 箍筋环扣连接； 单调加载试验； 受剪性能

中图分类号:TU375. 1， TU317. 1 文献标志码:A 文章编号:1002￣848X(2022)04￣0106￣06

DOI:10. 19701 / j.jzjg.20200596

Experimental study on shear performance of precast concrete composite beams connected bystirrup ring buckle

ZHANG Lingcong1， LU Dan2， CUI Yang3， ZHAO Zhangyuan1， SHI Jiajun1， YANG Bo1，4

(1 Department of Civil Engineering， Zhejiang Sci￣Tech University， Hangzhou 310018， China； 2 Shanghai ArchitectureTechnology Innovation Center of East China Architectural Design and Research Institute Co.， Ltd.， Shanghai 200002，China； 3 Zhejiang Hualin Construction Group Co.， Ltd.， Hangzhou 311100， China； 4 Zhejiang Precast ConcreteIndustrial Construction Technology Research Center， Hangzhou 310018， China)

Abstract: In order to facilitate on￣site construction， a new precast concrete composite beam connected by stirrup ringbuckle is proposed. Four precast concrete composite beam specimens (including two " concave" shape composite beams andtwo " convex" shape composite beam) and two cast￣in￣place comparison beam specimens with different shear span ratioswere designed and fabricated to carry out the monotonic concentrated loading test. Based on the analysis of the failure mode，the load￣deflection curve and the stirrup strain of the specimens， the influence of the fabrication technology of the stirrupand the length of the stirrup connection on the shear performance of the composite beam was systematically studied. The testresults show that shear failure occur in all specimens. The ring buckle connection stirrup can effectively transfer the shearforce in the beam. The longitudinal reinforcement strain distribution of " convex" composite beam is basically the same asthat of cast￣in￣place beam， and the longitudinal reinforcement strain of " concave" composite beam is quite different fromthat of cast￣in￣place beam. The failure load and initial stiffness of new composite beams are about 7% and 4% higher thanthat of cast￣in￣place beam. The " concave" shape composite beam is superior to the " convex" shape composite beam interms of mechanical properties， manufacturing technology and field construction convenience.

Keywords:precast concrete composite beam； stirrup ring buckle connection； monotonic loading test； shear performance

∗浙江省重点研发计划项目(2018C03033￣2)，广西自然科学基金项目(2018GXNSFAA050145)，国家级大学生创新创业训练计划项目(201810338030)。

第一作者:张玲聪，硕士研究生，主要从事装配式混凝土结构方向的研究，Email: 1395788513@ qq.com。

[引用本文] 张玲聪，卢旦，崔暘，等. 箍筋环扣连接预制混凝土叠合梁受剪性能试验研究[ J]. 建筑结构，2022，52(4):106￣111. ZHANG Lingcong， LU Dan， CUI Yang， et al. Experimental study on shear performance of precast concretecomposite beams connected by stirrup ring buckle[J]. Building Structure，2022，52(4):106￣111.