您现在的位置:建筑结构>> 期 刊>> 2020年>> 第24期>>正文内容
混凝土空心砌块房屋横墙间距及宽度限值的探讨
陆加国1,程绍革2,史铁花2,吴正能1,王述标1,杨迪1,梁波波1
摘 要

(1 贵州中建伟业建设(集团)有限责任公司建筑勘察设计研究院,凯里 556000;2中国建筑科学研究院有限公司,北京 100013)

[摘要]我国现行《建筑抗震鉴定标准》(GB 50023—2009)规定,混凝土砌块类房屋的横墙间距及宽度限值为普通粘土砖房屋的限值乘以相应的修正系数,然而,房屋的横墙间距及宽度限值与材料强度、楼层重力荷载代表值等参数之间并非简单的线性关系,故《建筑抗震鉴定标准》(GB 50023—2009)中规定的算法有一定的不合理性。根据结构力学原理,推导出砌块类房屋横墙间距及宽度限值的计算方法,并与规范算法进行对比分析,提出不同墙体类别及砂浆强度的合理修正系数。

[关键词]砌体结构;混凝土空心砌块;横墙间距;房屋宽度;承重墙;修正系数

中图分类号:TU362文献标识码:A文章编号:1002-848X(2020)24-0056-05

 

Discussion on cross wall spacing and width limits of the horizontal walls of concrete hollow block building

LU Jiaguo1, CHENG Shaoge2, SHI Tiehua2, WU Zhengneng1, WANG Shubiao1, YANG Di1, LIANG Bobo1

(1 Guizhou Zhongjian Weiye Construction (Group) Co., Ltd., Building Survey Design Institute, Kaili 556000, China;2 China Academy of Building Research, Beijing 100013, China)

Abstract:The current code for “Standard for seismic appraisal of buildings” (GB 50023—2009) stipulates that, cross wall spacing and width limit of the horizontal walls of concrete block buildings are the limits of ordinary clay brick houses multiplied by the corresponding correction coefficient. However, there is not a simple linear relationship between cross wall spacing and width limits of the horizontal walls of buildings and the material strength, representative value of the floor gravity load and other parameters. Therefore, the algorithm specified in the “Building seismic appraisal standard” (GB 50023—2009) is unreasonable. According to the principle of structural dynamics, the calculation method of cross wall spacing and width limit of the horizontal wall of the block building was derived, and compared with the standard algorithm, reasonable correction coefficients for different wall types and mortar strength were proposed.

Keywords:block structure; concrete hollow block; cross wall spacing; housing width; load-bearing walls;correction coefficient

 

作者简介:陆加国,硕士,讲师,719326109@qq.com。

下载地址

    你还没注册?或者没有登录?这篇论文要求至少是本站的注册会员才能阅读!

    如果你还没注册,请赶紧点此注册吧!

    如果你已经注册但还没登录,请赶紧点此登录吧!