- 摘 要
-
(1 兰州理工大学土木工程学院 730050; 2 苏州科技学院土木系 215011)
【提要】 在对30层钢框架进行预设计的基础上,选定梁柱栓焊连接试件进行有限元分析。经过对该连接试件及其节点域的滞回性能和应力分布进行有限元分析后得出,节点域具有非常稳定的非线性变形能力和耗能能力,对连接的塑性转动能力贡献较大。建议设计中允许节点域发生非线性变形,以降低对连接的塑性转动能力要求。节点域的剪应力在节点域中心最高,向四角逐渐降低,节点域剪切屈服后,几乎所有的柱轴力都转移到柱翼缘上。建议设计时选用翼缘宽大的柱截面,以保证柱翼缘能够承受因节点域剪切屈服而由柱腹板转移的压力。
【关键词】 钢框架 梁柱节点 节点域 有限元模型
Influence of Panel Zone on Performance of Rigid Beamcolumn Connections in Steel Frames/Wang Wanzhen1,Gu Qiang2,Wang Xiuli1(1 Lanzhou University of Science & Technology,Lanzhou 730050,China;2 University of Science & Technology of uzhou,Suzhou 215011,China)
Abstract:Based on the calculation results of a 30layer steel frame structure,a beamcolumn connection is chosen to be anayzed by FEM.The hysteresis performance and stress distribution of connection and panel zone calculated by FEM show that,panel zone has very steady nonlinear deformation capacity which improves the capacity of plastic rotation of connection significantly.The inelastic deformation in panel zone can be allowed in order to reduce the request for plastic rotation of the connection.The shear stress in panel zone is the highest in center and reduces towards corners.Almost all axis force in the column transfers to its flanges after shear yielding of panel zone.It is suggested that wide flange section should be selected in design to ensure flanges can endure the pressure transferred from column web.
Keywords:steel frame;beamcolumn connections;panel zone;finite element model