（1 北京市建筑设计研究院，北京 100045；2 中国建筑上海设计研究院有限公司，上海 200063）

［摘要］沈阳星摩尔购物广场亮窗钢结构由单层网壳及树形支承柱构成。单层网壳为复杂的空间曲面，平面尺寸长约285m，宽约200m。网壳边界较多，周边均与混凝土结构交接，温度作用对结构设计起控制作用。通过采用弹性支座，在温度影响最为不利的地方设置一道温度缝，不仅大大降低了温度作用下的支座反力，同时将支座位移也控制在合理范围内。弹性屈曲及弹塑性稳定分析表明，该网壳结构具有较高的屈曲荷载和稳定承载力。

［关键词］亮窗；单层网壳；温度作用；弹性支座；稳定

中图分类号：TU318文献标识码：A文章编号：1002-848X(2011)05-0068-05

Design of steel structure for Shenyang Star Mall Plaza Skylight

Guo Yufei¹, Chen Binlei¹, Wang Jialin¹, Zhao Yanlu ²(1 Beijing Institute of Architectural Design, Beijing 100045, China; 2 China Shanghai Architectural Design & Research Institute Co., Ltd., Shanghai 200063, China)

Abstract:Steel structure of Shenyang Star Mall Plaza Skylight is composed of single-layer latticed shell and dentritic columns. The single-layer latticed shell is a complex spatial surface which is 285m long and 200m wide. There are many boundaries of shell structure and they are connected with concrete structures, and the temperature action controls the steel structural design. By using elastic supports, together with a temperature joint located at the most effective position, structural reaction forces under temperature action were greatly reduced, and support displacements were also controlled within reasonable limits. Based on elastic buckling and elastic-plastic stability analysis, it is found that the shell structure has a higher buckling load and ultimate load carrying capacity.

Keywords:skylight; single-layer latticed shell; temperature action; elastic support; stability

作者简介：郭宇飞，博士，工程师，Email:yufeig99@163.com。

参考文献

［1］ANSYS, Inc. ANSYS Online Documentation［OL］. 2004.

［2］GB50017—2003 钢结构设计规范［S］. 北京: 中国计划出版社, 2003.

［3］JGJ61—2003  网壳结构技术规程［S］. 北京: 中国建筑工业出版社, 2003.

［4］沈世钊，陈昕. 网壳结构稳定性［M］. 北京: 科学出版社, 1999.

［5］王洪军, 张安安, 张皓涵，等. 世博轴阳光谷单层网壳钢节点承载性能研究［J］. 施工技术, 2009, 38(8):31-34.

［6］WANG D S, GAO C, ZHANG W Y, et al- A brief introduction on structural design of cable-membrane roof and Sun Valley steel structure for Expo Axis project［J］-Spatial Structures, 2009, 15(1): 89-96.