（北京市城市规划设计研究院，　北京 100045）

［摘要］在张弦桁架结构中，索夹节点是保证拉索与主体钢结构之间协同工作的关键部分。以内蒙某工程为背景，对解决模拟索体柔性特征的方法进行了研究，并对索夹节点进行了ABAQUS有限元分析，提出了静力状态下传统索夹节点受力性能方面的不足，并对其受力性能优化设计方法进行了研究，分别针对索夹边缘倒角以及索夹与索体间的铝垫层对于索夹节点受力性能的影响进行了参数化分析。分析结果表明，使用几何构造优化与铝垫层优化两种优化措施对于索夹节点受力性能优化效果明显。倒角的尺寸在1/4～2/5拉索直径范围内时优化效果较好，拉索表面最大等效应力降低8%～11%；铝垫层厚度在1-0～2-5mm范围内时优化效果较好，拉索表面最大等效应力降低17%～19%；两种措施同时使用优化效果更佳，优化效果优于分别单独使用任何一种优化措施。

［关键词］张弦桁架； 索夹节点； ABAQUS； 受力性能优化； 倒角； 铝垫层

中图分类号：TU393-3文献标识码：A文章编号：1002-848X(2019)02-0086-06

Research on mechanical performance and optimization design method of truss string cable clamp joint

Chen Ziyi

(Beijing Municipal Institute of City Planning & Design, Beijing 100045, China)

Abstract:In the string truss structure, the cable clamp joint is a key part of ensuring the cooperative working between the cable and the main steel structure. Based on a project in Inner Mongolia, the method was studied to solve the flexible characteristics of the simulated cable body and ABAQUS finite element analysis was performed on the cable clamped joints. The insufficiency of the mechanical performance of traditional cable clamp joints under static state was proposed, and the mechanical performance optimization design method was studied. The parametric analysis of the influence of the cable clamp edge chamfer and the aluminum cushion between the cable clamp and the cable body on the force behavior of the cable clamp joints was carried out. Analysis results show that the optimization of the mechanical properties of the cable clamp joints is significantly improved by two optimization measures: geometric structure optimization and aluminum cushion optimization. If the chamfer size ranges between 1/4~2/5 of the cable diameter, the optimization effect is better, and the maximum equivalent stress of the cable surface is reduced by 8%~11%. If the thickness of the aluminum cushion ranges between 1-0~2-5mm, the optimization effect is better, and the maximum equivalent stress of the cable surface is reduced by 17%~19%. It has better optimization effect when the two measures are used at the same time and the optimization effect is better than any single optimization measure separately.

Keywords:truss string; cable clamp joint; ABAQUS; mechanical performance optimization; chamfer; aluminum cushion

*国家自然科学基金项目（51578046）。

作者简介：陈子毅，硕士，高级工程师，Email: 61253333@qq.com。