方钢管混凝土柱-型钢梁节点断裂分析及延性节点研究*

王万祯1, 2，   杨保证2，   顾   强3，   黄俊伟2

(1 宁波大学建筑工程与环境学院，宁波 315211；2 兰州理工大学土木工程学院，兰州 730050；3 苏州科技学院土木工程学院，苏州 215011)

［摘要］运用结构钢椭球面屈服模型和椭球面断裂模型，对梁柱节点试验进行了数值模拟分析，得出了等效考虑焊接残余应力和焊接缺陷的对接焊缝断裂因子CI的修正系数k。对方钢管混凝土柱-型钢梁节点进行了基于椭球面强度模型的数值模拟和断裂分析，结果显示：柱对梁的强约束使对接焊缝处应力集中严重，该处的等效应力和平均应力幅值均较高，当对接焊缝应力场函数达到建议的椭球面断裂准则临界值时，该处发生断裂。以结构钢椭球面断裂模型为评判依据，提出了降低对接焊缝等效应力和平均应力幅值（即提高节点延性）的构造建议。

［关键词］钢管混凝土柱-型钢梁节点；椭球面屈服模型；椭球面断裂模型；等效应力；平均应力；断裂

中图分类号：TU391文献标识码：A文章编号：1002-848X(2011)01-0026-04

Fracture analysis and ductile joints of concrete filled square

steel tube column-steel beam connections

Wang Wanzhen1, 2, Yang Baozheng2, Gu Qiang3, Huang Junwei2

( 1 Faculty of Architectural, Civil Engineering and Environment, Ningbo University, Ningbo 315211,China;

2 School of Civil Engineering, Lanzhou University of Technology, Lanzhou 730050, China;

3 School of Civil Engineering, Suzhou University of Science and Technology, Suzhou 215011, China)

Abstract:Using an elliptical yield model together with an elliptical fracture model, the correctional coefficient of fracture index was obtained to equivalently calculate the effects of residual stress and disfigurement through numerical simulation and fracture analysis of beam-column connection tests. The concrete filled square steel tube column-steel beam connections were numerical simulated and analyzed based on the elliptical yield model and the elliptical fracture model. Numerical results show that the strong constraint of column on the beam leads to high stress concentration in beam flange butt weld, where the equivalent stress and the average stress amplitude are high. The butt weld fractured when the stress function reached the ellipsoidal fracture critical value. Using the ellipsoidal fracture criterion for evaluation, the details of connection were proposed to reduce equivalent stress and average stress amplitude in butt weld.

Keywords:concrete filled square steel tube column-steel beam connection; elliptical yield model; elliptical fracture model; equivalent stress; average stress; fracture

*国家自然科学基金项目(50808098)，宁波市自然科学基金(2010A610082)，宁波大学科研项目(XKL100)。

作者简介：王万祯，博士，副教授， Email：wangwanzhen1975@sina.com。

参考文献

［1］HAMBURGER. Moment-frame connection qualification criteria for seismic design ［R］. Fourth International Workshop on Connections in Steel Structures, Roanoke,VA, 2000.

［2］CALADO L, MELE E. Cyclic behavior of steel beam-to-column joints: governing parameters of welded and bolted connections ［R］. Fourth International Workshop on Connections in Steel Structures, Roanoke,VA, 2000.

［3］PARK J W, KANG S M, YANG S C. Experimental studies of wide flange beam to square concrete-filled tube column joints with stiffening plates around the column ［J］. Journal of Structural Engineering, 2005, 131(12): 1866-1876.

［4］王万祯. 高强钢广义屈服和破坏理论［J］. 固体力学学报，2007，28(4)：389-392.

［5］王万祯. 结构钢开裂准则及断裂试验分析［J］. 工程力学，2008，25(5)：27-31.

［6］王万祯. 铝合金宏观断裂准则［J］. 西安交通大学学报，2007，41(5)：616-620.

［7］黄俊伟，王万祯，杨俊晓. 基于广义强度模型的空心球节点承载力分析［J］. 甘肃科学学报，2009，21(3)：126-130.

［8］李波，杨庆山. 腹板开孔型钢框架梁柱节点抗震性能试验研究［J］. 哈尔滨工业大学学报，2006，38(8)：1303-1305.

［9］杨庆山，李波，杨娜. 腹板开圆孔钢框架梁柱节点的性能研究［J］. 工程力学，2007，24 (9)：111-121.

［10］FEMA-350. Recommended seismic design criteria for new steel moment-frame buildings［S］. 2000.

［11］陈惠发. 土木工程材料的本构方程［M］. 余天庆，王勋文，刘再华，译.武汉：华中科技大学出版社，2001.

［12］SUSANTHA K A S, GE HANBIN, USAMI TSAMI. Uniaxial stress-strain relationship of concrete confined by various shaped steel tubes ［J］. Engineering Structures, 2001, 23（10）:1331-1347.

［13］韩林海. 钢管混凝土结构——理论与实践［M］.北京：科学出版社，2004.

［14］钟善桐. 钢管混凝土结构 ［M］. 3版. 北京：清华大学出版社，2003.

［15］JGJ101—96 建筑抗震试验方法规程［S］. 北京：中国建筑工业出版社，1997.