您现在的位置:建筑结构>> 期 刊>> 2017年>> 第12期>>正文内容
圆形ETFE气枕粘塑性成形过程分析
巫燕贞1,吴明儿2,李殷堂3,崔家春1
摘 要

(1 华东建筑设计研究院有限公司, 上海 200011; 2 同济大学建筑工程系, 上海 200092;3 中船第九设计研究院工程有限公司, 上海 200063)

[摘要]设计制作了圆形ETFE气枕模型,进行气枕粘塑性成形试验,得到气枕膜面高度与内压的实时变化曲线。基于Perzyna的粘塑性本构方程,对ETFE薄膜进行单向拉伸试验,得到材料拉伸曲线及屈服强度,通过MATLAB拟合得到Perzyna本构方程参数,利用有限元软件进行了数值分析,并与试验结果进行比较。结果表明:ETFE气枕粘塑性成形过程试验结果与数值分析结果吻合良好,运用Perzyna粘塑性本构方程以及非线性材料模型可以准确、有效地完成ETFE粘塑性成形过程分析。

[关键词]ETFE气枕; 粘塑性; 有限元分析

中图分类号:TU398-7文献标识码:A文章编号:1002-848X(2017)12-0064-04

 

Viscoplastic forming analysis of ETFE circular cushion

Wu Yanzhen1, Wu Ming′er2, Li Yintang3, Cui Jiachun1

(1 East China Architectural Design & Research Institute Co.,  Ltd.,  Shanghai 200011, China; 

2 Department of Building Engineering, Tongji University, Shanghai 200092, China; 3 China Ship Design & Research Institute Engineering Co.,  Ltd.,  Shanghai 200063, China)

Abstract:ETFE circular cushion model was designed and the viscoplastic forming tests were carried out, the changing real\|time data curve of  pressure and height of air pillow were obtained. Based on the Perzyna model, uniaxial tensile tests were carried out on ETFE film while the  material tensile curve and yield strength were obtained, thus constants of Perzyna simplified viscoplastic model were obtained by MATLAB. Simulation analysis of this cushion was carried out by using finite elements software. Comparing finite element calculation results to testing results, it′s found that the test results and the numerical results are in good agreement in the ETFE cushion viscoplastic forming process, the analysis of  ETFE cushion viscoplastic forming process can accurately and effectively complete by using of Perzyna viscoplastic constitutive equation.

Keywords:ETFE cushion; viscoplastic; finite element analysis

 

作者简介:巫燕贞,硕士,工程师,Email:yanzhen_wu@arcplus.com.cn。

下载地址

    你还没注册?或者没有登录?这篇论文要求至少是本站的注册会员才能阅读!

    如果你还没注册,请赶紧点此注册吧!

    如果你已经注册但还没登录,请赶紧点此登录吧!