您现在的位置:建筑结构>> 期 刊>> 2017年>> 第07期>>正文内容
钢-混凝土组合梁设计改进及其在超高层结构中的应用研究
马凯
摘 要

(北京市建筑设计研究院有限公司, 北京 100045)

[摘要]探讨了组合框架梁刚度放大系数计算方法,分析了组合框架梁刚度放大系数对整体结构的影响。通过减小上翼缘尺寸改进了组合次梁截面,并对组合次梁挠度及承载力的变化进行研究。给出了组合框架梁与组合次梁统筹深化设计流程。改进组合框架梁截面形式可以简化刚度放大系数的计算方法,并且使刚度放大系数得到提高。组合框架梁的刚度放大系数与层间位移角和框架部分分配的地震剪力呈正相关。改进组合次梁的挠度有所增大,承载力基本没有变化。通过对组合框架梁和组合次梁进行统筹设计,可以有效利用结构高度,保证建筑净高。

[关键词]组合梁; 设计改进; 刚度放大系数; 超高层

中图分类号:TU398文献标识码:A文章编号:1002-848X(2017)07-0052-05

 

Research on design improvement of steel-concrete composite beam and its application in super high-rise structure

Ma Kai

(Beijing Institute of Architectural Design, Beijing 100045, China)

Abstract:The calculation method of rigidity amplification coefficient for composite frame beam was discussed, and the influence of rigidity amplification coefficient on the whole structure was analyzed. The section of composite secondary beam was improved by reducing the size of upper flange and the variation of deflection and bearing capacity was studied. The process of detailed design on both composite frame beam and composite secondary beam was given. The calculation method of rigidity amplification coefficient can be simplified and the rigidity amplification coefficient can be increased by the o,improvement of section form for composite frame beam. The rigidity amplification coefficient of composite frame beam is correlated with inter-story displacement angle and seismic shear force distributed by framework. The deflection increases after the improvement of composite secondary beam, but there is no change basically on bearing capacity. The structural height can be used effectively and the clear height can be ensured by optimized design on both composite frame beam and composite secondary beam.

Keywords:composite beam; design improvement; rigidity amplification coefficient; super high-rise structure

 

作者简介:马凯,硕士,工程师,Email:mk-14132008@163.com。

下载地址

    你还没注册?或者没有登录?这篇论文要求至少是本站的注册会员才能阅读!

    如果你还没注册,请赶紧点此注册吧!

    如果你已经注册但还没登录,请赶紧点此登录吧!