您现在的位置:建筑结构>> 期 刊>> 2010年>> 第01期>>正文内容
剪力墙平面布置对异形柱框剪结构地震响应的影响分析
秦力1,2,贾小刚2,杨延波2
摘 要
 
(1 同济大学土木工程学院,上海 200092; 2 东北电力大学建筑工程学院,吉林 132012)
[摘要]通过调整某异形柱框架-剪力墙结构的剪力墙布置方案,进行改进后模型的模态分析和弹性时程分析,研究剪力墙和异形柱不同平面布置对地震响应的影响。分析发现,改进后模型的抗震性能显著提高,底部剪力变化不大,最大楼层位移和结构自振周期得到明显改善,最大楼层位移值减小14.4%,自振周期减小4.34%。
[关键词]异形柱框架-剪力墙;模态分析;弹性时程分析;楼间位移
Study on the influence of different layouts of shear-walls on seismic responses of a RC frame-shear wall structure with specially shaped columns
Qin Li1,2, Jia Xiaogang2, Yang Yanbo2(1 School of Civil Engineering, Tongji University, Shanghai 200092, China; 2 School of Architectural and Civil Engineering, Northeast Dianli University, Jilin 132012, China)
Abstract:The layout of shear-walls of an actual RC frame-shear wall structure had been adjusted, and then methods of modal analysis and time-history analysis were used to study the effect of different layouts of shear-walls and specially shaped columns on the structure under earthquake. After analysis, it is found that the seismic behavior of the adjusted model has improved obviously when having slightly variations of shear value at the bottom of structure. The maximum story displacement and natural period are reduced most apparently by 14.4% and 4.34%.
Keywords:specially shaped column frame-shear wall structure; modal analysis; elastic timehistory analysis; story displacement
吉林省教育厅科技计划项目(200630);吉林市科技发展计划项目(200702)。
作者简介:秦力,博士,教授,Email:jilinql@163.com。
参考文献
[1]徐培福.超限高层建筑结构基于性能抗震设计的研究[J]. 土木工程学报,2005,38(1):1-10.
[2]FEMA 356(2000) Prestandard and Commentary for the Seismic Rehabilitation of Buildings[S]. Washington D.C.:Federal Emergency Management Agency, 2000.
[3]孟焕陵,沈蒲生.框-剪结构考虑墙肢剪切变形时剪力墙合理数量[J].湖南大学学报(自然科学版),2005,32(6):6-10.
[4]BERTERO V V. Seismic Performance of Reinforced Concrete Structure[M].1984.
[5]武征霄.框架-剪力墙结构协同工作计算分析与研究[D].西安:西安建筑科技大学,2004.
[6]JGJ149—2006 钢筋混凝土异形柱结构技术规程[S].北京:中国建筑工业出版社,2006.
[7]JGJ3—2002 高层建筑混凝土结构技术规程[S].北京:中国建筑工业出版社,2002.
[8]GB50011—2001建筑抗震设计规范[S].北京:中国建筑工业出版社,2001.
下载地址

    你还没注册?或者没有登录?这篇论文要求至少是本站的注册会员才能阅读!

    如果你还没注册,请赶紧点此注册吧!

    如果你已经注册但还没登录,请赶紧点此登录吧!