(扬州大学建筑科学与工程学院，扬州 225009)

［摘要］介绍了轻型木框架剪力墙结构中面板与木框架钉节点的试验研究，按照ASTM-F1575-03标准对两种不同型号的中国钉子各做了10个试件的抗弯试验；并按照ASTM-F1676-03标准进行了两组各10个试件的单向拉伸荷载试验，一组荷载垂直于木材纹路方向，另一组荷载平行于木材纹路方向。通过试验发现,不同的钉子规格对钉节点性能的影响不是很大。在国外常用的指数型钉节点模型的基础上，建立了一种适用于中国钉子两个方向钉节点的修正模型，该模型为利用有限元软件分析轻型木框架剪力墙结构提供了面板与木框架钉节点连接性能的基础资料。

［关键词］木框架剪力墙；钉节点；试验研究；模型

Test research on nail joints of light wood structure

Zou Xiaojing, Guo Yun, Liu Yan(College of Civil Engineering, Yangzhou University, Yangzhou 225009, China)

Abstract:Test research on nail joints between sheathing-to-wood connections on light wood frame shear walls was introduced. Two different types of Chinese screw nails were used to conduct bending test according to ASTM-F1575-03- There were 10 nails of each nail type. Based on ASTM-F1676-03, one directional tensile tests of two groups, one with perpendicular-to-grain and the other with parallel-to-grain nail joints specimens using two standards nails mentioned above, were carried out. Each group has 10 specimens. It was found that different standards of nails had little effect on the performance of nail joints. A modified model which was suitable to domestic nails in two directions was established on the basis of exponential model. Useful data on the performance of sheathing-to-wood connections, which can be integrated into the finite element software to analyze wood frame construction, were provided.

Keywords:wood frame shear wall; nail joints; test research; model

江苏省科技厅自然科学基金项目(BK2007083)；江苏省教育厅自然科学基金项目(07KJB560129)。

通讯作者：刘雁，硕士，教授，Email:yzsliuyan@gmail.com。

参考文献

［1］ASTM-F1575-03 Standard Test Method for Determining Bending Yield Moment of Nails［S］. Pennsylvania, USA: ASTM international, 2003.

［2］ASTM-F1676-03 Standard Specification for Basic Tumbling Mats［S］. Pennsylvania, USA: ASTM international, 2003.

［3］National Evaluation Service Committee. Power-driven staples and nails for use in all types of building construction［R］. Report No. NER-272, Council of American Building Officials,1997.

［4］LEICHTI R. Sheathing nail bending-yield strength——Role in shear wall performance［C］//WCTE 2006-9th World Conference on Timber Engineering, 2006.

［5］MACK J J. The load-displacement curve for nailed joints［J］. Journal of the Institute of Wood Science, 1977,7(6):34-36.

［6］MCLAIN T E. Curvilinear load-slip relations in laterally loaded nailed joints［D］. Fort Collins,Colorado:Colorado State University, 1975.

［7］EASLEY J T, FOOMANI M, DODDS R H. Formulas for wood shear walls［J］. Journal of the Structural Division, American Society of Civil Engineers, 1982,108(ST11):2460-2478.

［8］FOSCHI R O. Analysis of wood diaphragms and trusses Part 1： Diaphragms［J］.Canadian Journal of Civil Engineering,1977,4(3): 345-352.

［9］FOSCHI R O. Load-slip characteristics of nails［J］. Journal of Wood Science, 1974,7(1): 69-76.

［10］DOLAN J D. The Dynamic Response of Plywood Shear Walls［D］. Vancouver, B.C, Canada：Univ. of British Columbia, 1989.

［11］FOLZ B, FILIATRAULT A. Cyclic analysis of wood shear walls［J］. Journal of Structural Engineering, 2001,127(4): 433-441.