重组竹销槽承压强度试验研究*
- 摘 要
-
（1 南京林业大学土木工程学院， 南京 210037； 2 常州市建设工程结构与材料性能研究重点实验室， 常州工学院， 常州 213002）
［摘要］对15个重组竹顺纹销槽承压试件和15个重组竹横纹销槽承压试件进行单调加载试验，采用位移控制法加载直至破坏，研究销槽的极限承压强度。试验结果表明，顺纹销槽承压试件的极限承压强度平均值为91.59MPa，呈现明显的脆性破坏特征，试件刚度较大；而横纹销槽承压试件的极限承压强度平均值为71.81MPa，其变异系数达到0.143 2，最大位移均在10mm左右，表现出较好的延性，试件刚度也明显较小。［关键词］重组竹; 销槽承压; 极限承压强度; 延性中图分类号：TU366.1 文献标识码：A 文章编号：1002-848X(2015)22-0107-04
Experimental study on dowel-compression strength of parallel bamboo strand lumberZhou Junwen1，2, Huang Dongsheng1, Zhao Fenghua2(1 College of Civil Engineering, Nanjing Forestry University, Nanjing 210037， China; 2 Changzhou Key Lab of Construction Engineering Structure and Material Properties, Changzhou Institute of Technology, Changzhou 213002, China)Abstract: The monotonic loading tests on 15 dowel-compression specimens of parallel bamboo strand lumber loaded parallel to grain and 15 dowelcompression specimens of parallel bamboo strand lumber loaded perpendicular to grain were carried out. Displacement control method was used to load till failure of the specimens to study the ultimate compression strength for dowel. The test results show that the average ultimate compression strength value of dowel-compression specimens loaded parallel to grain is 91.59MPa. The mode of brittle failure is observed and the specimen stiffness is larger. However, average ultimate compression strength value of dowel-compression specimens loaded perpendicular to grain is 71.81MPa with variation coefficient of 0.143 2 and the maximum displacement about 10mm. The specimens show signs of ductile behavior with smaller stiffness.Keywords: parallel bamboo strand lumber; dowel-compression; ultimate compression strength; ductility
*国家自然科学基金项目（51378263），江苏省自然科学基金项目（BK2012820），江苏省高校自然科学基金项目（13KJD560001），建设部科技项目（2014-K2-014）作者简介：周军文，博士研究生，副教授，Email：junwenzhou@126.com。
