(1 华侨大学土木工程学院，泉州 362021； 2 中冶建筑研究总院有限公司，北京 100088；3 北京中外建建筑设计有限公司，厦门 360012)

［摘要］进行了33个木材与玄武岩纤维布(BFRP)粘结试件的单剪试验，主要考察粘贴层数对BFRP与木材粘结性能的影响，测量了不同粘贴层数下BFRP与木材界面的应变分布规律。比较了在不同粘贴层数下BFRP与木材之间的极限荷载和粘结应力分布情况，结果表明，随着BFRP粘贴层数的增加，有效粘结长度呈增加趋势，在木材含水率为10%条件下，1，2，3层玄武岩纤维布与木材(福杉)的有效粘结长度分别在100，120，150mm左右；粘贴层数对木材与玄武岩纤维布的极限粘结荷载也有一定影响，随BFRP粘贴层数的增加，极限粘结荷载逐渐增加。

［关键词］玄武岩纤维布；木材；粘贴层数；极限荷载；粘结应力；有效粘结长度

Experimental study on the effective bond length between BFRP sheets and wood under different BFRP bond layers

Hu Ling¹, Yang Yongxin^1，2, Wang Jiangen¹, Zhuang Rongzhong^1，3, Chen Xujun¹, Xing Jianying¹(1 College of Civil Engineering, Huaqiao University, Quanzhou 362021, China;2 Central Research Institute of Building and Construction of MCC Group, Beijing 100088, China;3 Beijing CCI Architectural Design Co., Ltd., Xiamen 360012, China)

Abstract:Single shear tests for thirty-three specimens on bond properties between Basalt Fiber Reinforced Polymer(BFRP) sheets and wood were carried out with emphasis on the effect of BFRP bond layers.  The interfacial strain distribution between BFRP sheets and wood was measured. By comparing the ultimate load and the distribution of bond stress between BFRP sheets and wood under different BFRP bond layers, it is concluded that  the effective bond length for wood and one, two, three BFRP bond layers is 100, 120, 150mm or so. With the growth of BFRP bond layers, not only the effective bond length but also the ultimate load between BFRP sheets and wood sheets increase.

Keywords:Basalt Fiber Reinforced Polymer; wood; bond layers; ultimate load; bond stress; effective bond length

国家科技攻关(国际合作)项目(2005DFBA0002)；国家863计划资助项目(2009AA032303)。

作者简介：胡玲，硕士研究生，Email:huling@hqu.edu.cn。

参考文献

［1］陈莹.玻璃纤维复合材料与粘土砖的粘结性能研究［D］.广州：华侨大学,2005.

［2］杨勇新, 岳清瑞. 碳纤维布与混凝土粘结破坏面特征［J］. 工业建筑，2003，33(9)：1-3.