(1 湖南大学土木工程学院钢结构研究所，长沙 410082； 2 浙江义乌工商职业技术学院土木工程系，义乌 322000)
［摘要］对支管受轴向压力作用的垫板加强Y型圆钢管节点进行了非线性有限元分析，研究了几何参数对加强型节点受压极限承载力的影响。分析表明，设置适当尺寸的垫板能够增强Y型圆钢管相贯节点承受荷载和抵抗变形的能力。用多元线性回归法求出垫板加强Y型圆钢管节点受压极限承载力提高系数φp的回归方程，从而提出了垫板加强Y型圆钢管节点受压极限承载力的建议公式。
［关键词］垫板；加强型节点；Y型管节点；受压极限承载力；有限元分析
Research on ultimate compressive bearing capacity of circular tubular Y-joints reinforced with doubler plate
Shu Xingping1, Zhang Xu1，2, Yuan Zhishen1(1 Steel Structural Institute of Civil Engineering College, Hunan University, Changsha 410082, China；2 Department of Civil Engineering,Yiwu Industrial and Commercial College,Yiwu 322000,China)
Abstract:Nonlinear finite element analysis is used for the numerical computation of circular tubular Y-joints reinforced with doubler plate under axial compression of the brace. The research on the effects of geometric parameters on the ultimate compressive bearing capacity of reinforced joints shows that with a proper reinforced plate size, the load-carrying capacity and the deformation-resistance capacity of circular hollow section Y-joints will be improved. By multiple linear regression, a regressive equation is deduced withφp coefficient for the improvement of the ultimate compressive bearing capacity of the joints. Then the design formula to calculate the ultimate compressive bearing capacity of circular tubular Y-joints reinforced with doubler plate is offered.
Keywords:doubler plate; reinforced joint; Y-joints; ultimate compressive bearing capacity; finite element analysis
作者简介：舒兴平，教授，博导，一级注册结构工程师，Email：hnlget@163.com。
参考文献
［1］丁芸孙.圆管结构相贯节点几个设计问题的讨论［J］.空间结构，2002，8(2).
［2］PACKER J A, HENDERSON J E.空心管结构连接设计指南［M］. 北京：科学出版社，2001.
［3］舒兴平.高等钢结构分析与设计［M］.北京：科学出版社，2006.
［4］舒兴平，朱邵宁，夏心红，等.长沙贺龙体育馆钢屋盖圆管相贯节点足尺试验研究［J］.建筑结构学报，2004，25(3).
［5］FUNG T C, SOH C K, CHAN T K, et al. Stress concentration factors of doubler plate reinforced tubular T joints［J］. Journal of Structural Engineering, 2002, 128(12).
［6］FENG QI, TAN JIAHUA. The ultimate strength of doubler plate reinforced Y-joints under compression loading［J］. Journal of Marine Science and Application, 2005, 4(2).
［7］CHOO Y S, et al. Static strength of T-joints reinforced with doubler or collar plates. I: experimental investigations［J］. Journal of Structural Engineering, 2005, 131(1).
［8］GB50017—2003钢结构设计规范［S］. 北京：中国计划出版社，2003.