邵永健1，2，刘凡2，翁晓红2，赵鸿铁1，殷志文2，夏敏2（1 西安建筑科技大学土木工程学院，西安 710055； 2 江苏省结构工程重点实验室(苏州科技学院)，苏州 215011）
［摘要］为研究型钢轻骨料混凝土梁挠度及裂缝宽度的计算方法，对8根型钢轻骨料混凝土试验梁的挠度及裂缝宽度进行了分析，提出了型钢轻骨料混凝土梁刚度计算的“修正钢骨规程法”和裂缝宽度计算的“修正型钢规程法”。当试验荷载分别为0.3Pu，0.5Pu和0.7Pu时，按修正钢骨规程法计算得到的8根试验梁的挠度值与试验实测值的比值，其平均值分别为1.051，1.090和1.065；按修正型钢规程法计算得到的8根试验梁的裂缝宽度与试验实测值的比值，其平均值分别为1.066，1.016和1.045。可见型钢轻骨料混凝土梁用修正钢骨规程法来计算挠度和用修正型钢规程法来计算裂缝宽度是可行的。
［关键词］型钢轻骨料混凝土；梁；挠度；裂缝宽度；计算方法
Calculation of deflection and crack width of steel reinforced lightweight aggregate concrete beams
Shao Yongjian1，2, Liu Fan2, Weng Xiaohong2, Zhao Hongtie1, Yin Zhiwen2, Xia Min2(1 School of Civil Engineering, Xi′an University of Architecture & Technology, Xi′an 710055, China; 2 Jiangsu Key Laboratory of Structure Engineering(University of Science and Technology of Suzhou), Suzhou 215011, China)
Abstract:In order to study the calculation method of the deflection and crack width of steel reinforced lightweight aggregate concrete beams, the deflection and crack width of eight SRLC testing beams were analyzed. “Updated directive rules of SRC structures” used by stiffness calculation and crack width calculation were presented. When the test loads were 0.3Pu, 0.5Pu and 0.7Pu, the averages of the ratios of the calculation values according to “up-dated directive rules of SRC structures” to the measured values for the deflection of eight SRLC testing beams were 1.051, 1.090 and 1.065 respectively, and the averages of the ratios of the calculation values according to “up-dated directive rules of SRC structures” to the measured values for the crack width of eight SRLC testing beams were 1.066, 1.016 and 1.045 respectively. As a result, it was feasible to adopt “up-dated directive rules of SRC structures” to calculate the deflection and crack width of SRLC beams.
Keywords:steel reinforced lightweight aggregate concrete(SRLC); beams; deflection; crack width; calculation method
建设部科技研究项目(01-2-20)。作者简介：邵永健(1963-)，男，浙江湖州人，教授，工学博士。Email:shaoyong@usts.edu.cn。
参考文献
［1］刘凡，邵永健，等. 型钢轻骨料混凝土梁正截面受弯承载力的试验与计算［J］.建筑结构，2009，39(6).
［2］YB 9082—97钢骨混凝土结构设计规程［S］.北京：冶金工业出版社，1998.
［3］JGJ 138—2001/J130 2001型钢混凝土组合结构技术规程［S］.北京：中国建筑工业出版社，2002.
［4］姜维山，赵世春，孙慧中，等.型钢混凝土结构构件的研究［J］.建筑钢结构进展，2002，4(3):41-46.
［5］GB 50010—2002混凝土结构设计规范［S］.北京：中国建筑工业出版社，2002.
［6］JGJ12 —2006轻骨料混凝土结构技术规程［S］.北京：中国建筑工业出版社，2006.