（1 湖南大学土木工程学院钢结构研究所，长沙 410082；2 中国航空工业规划设计研究院，北京 100088）

［摘要］对5个管板连接构件进行了受压极限承载力试验研究和非线

性有限元分析。试验表明，未补强的试件GPC-1，GPC-3和用钢板补强的试件GPC-4，GPC-5的破坏模式均为试件的整体失稳，用焊接空心球补强的试件GPC-2的破坏模式为钢管的局部屈曲。试验结果与有限元计算结果基本吻合。实际工程中应用管板连接构件作为受压构件时，必须加强构件弱轴的刚度，以避免整体失稳破坏，而采用焊接空心球补强是一种有效的方法。

［关键词］管板连接；受压极限承载力；试验研究；非线性有限元分析

Experimental research on ultimate compressive bearing capacity of gusset plate connections to slotted tubes member

Shu Xingping¹，Weng Lanxi¹，Yuan Zhishen¹，Zheng Boxing¹，Ding Yunsun²（1 Steel Structural Institute of Civil Engineering College of Hunan University, Changsha 410082, China；2 China Aeronautical Project and Design Institute, Beijing 100088, China)

Abstract:Experimental research and nonlinear finite-element analysis of ultimate compressive bearing capacity on five gusset plate connections to slotted tubes members were carried out. The failure mode of models GPC-1 and GPC-3 which were not strengthened was the whole buckling failure, and so was the models GPC-4 and GPC-5 strengthened by steel plate. However, the failure mode of model GPC-2 strengthened by welded hollow spherical joints was the local buckling failure of the tube. The experimental results are close to the finite-element analysis results. The research indicates that when the gusset plate connections to slotted tubes member is used in practice, the rigidity of the member must be strengthened to avoid the happening of the whole buckling failure, and the combination of welded hollow spherical joints and gusset plate connection to slotted tubes member proves to be effective.

Keywords:gusset plate connections to slotted tubes; ultimate compressive bearing capacity; test nonlinear FEA

作者简介：舒兴平，博士，教授，一级注册结构工程师，Email:shuxingping@sina.com。

参考文献

［1］丁芸孙. 圆管结构相贯节点几个设计问题的讨论［J］. 空间结构，2002，8(2)：56-64.

［2］CHENG JJR, KULAK GL, KHOO H-Strength of slotted tubular tension members［J］. Canadian Journal of Civil Engineering, 1998, 25：982-991.

［3］ANSI/AISC 360-05. Specification for Structural Steel Buildings［S］.

［4］CAN/CSA-S16-01.Limit States Design of Steel Structures［S］.

［5］舒兴平，朱邵宁，夏心红，等. 长沙贺龙体育场钢屋盖圆管相贯节点足尺试验研究［J］. 建筑结构学报，2004，25(3)：8-13.

［6］舒兴平，朱正荣，王元清. N型方圆钢管相贯节点足尺试验研究［J］. 建筑结构学报, 2006，27(1)：66-70.

［7］董石麟，邢丽，赵阳，等.方钢管焊接空心球节点的承载力与实用计算方法研究［J］.建筑结构学报，2005，26(6)：27-37.

［8］舒兴平. 高等钢结构分析与设计［M］. 北京：科学出版社，2006.