- 摘 要
-
[摘要] 本文以具体工程为实例，通过分析桥台锚杆加固的作用机理、桥台所受的荷载，根据规范得出桥台混凝土锚杆加固设计方案。同时利用ANSYS有限元分析软件对桥台混凝土加固设计进行数值模拟,并对模拟分析结果进行对比，最后得出相应的结论，结果表明锚杆加固效果良好,又为前面的锚杆加固设计方案提供了理论支持。
[关键词] 桥台；加固设计；有限元分析
中图分类号：U457+.3 文献标识码：A 文章编号：1002-848X（）
作者简介：石新伟，硕士，工程师，Email：cranesxw@sina.com。
The abutment reinforcement design and finite element analysis
Shi Xinwei，Sun Yuanyuan，Wang Xuemin，Tian Chuan
（China Architecture Design & Research Group, Beijing 100044, China）
Abstract: Based on specific engineering as an example, this paper through the analysis of the abutment of anchor reinforcement mechanism, the abutment of load, it is concluded that the abutment according to the rules of concrete anchor reinforcement design scheme. At the same time, use the ANSYS finite element analysis software to simulate the abutment concrete reinforcement design. And the simulation results were compared, and finally got the corresponding conclusion. The results show that the anchor reinforcement effect is good and provides theory support for the anchor reinforcement design scheme.
Keywords: abutment; reinforcement design; finite element analysis
[1] [JZJGSJ1] 孙钧. 中国岩土工程锚固技术的应用与发展[M]. 北京. 中国建筑工业出版社，1996：27-32.
[2] 任青文，罗军. 锚杆应用及加固机理研究综述[J]. 水利水电科技进展，1997,17(1)：29-33.
[3] 朱焕春，吴海滨，赵海斌. 反复张拉荷载作用下锚杆工作机理试验研究[J]. 岩土工程学报，1998，21（6）：662-665.
[4] 沈影，洪志光. 锚杆支架的应用[M]. 北京：煤炭工业出版社，1959..
邵旭东. 桥梁工程[M]. 北京：人民交通出版社，2004.
