- 摘 要
-
(1 北京市建筑设计研究院有限公司, 北京 100045; 2 中国建筑标准设计研究院有限公司, 北京 100048)
[摘要]工程设计中地下车库的顶板常被设计为无梁楼盖体系,在设计时常遇到如下问题:如何合理确定框架柱抗震等级、轴压比限值,如何合理选取无梁楼盖弯矩、配筋计算参数,如何考虑活荷载不利布置,如何确定无梁楼盖配筋构造,规范中防脱落验算方法如何应用,结合某实际工程,对以上问题进行了讨论分析,并给出相应的设计建议。
[关键词]无梁楼盖; 内力分析; 配筋构造; 防脱落
中图分类号:TU318.2 文献标识码:A 文章编号:1002-848X(2015)04-0060-04
Discussion on common problems for flatplate floor design of underground garage
Lu Ye1, Xu Jing2
(1 Beijing Institute of Architectural Design, Beijing 100045, China;2 China Institute of Building Standard Design & Research, Beijing 100048, China)
Abstract:The top floor of underground garage is often designed as flatplate floor system. Some problems are often encountered in design such as the determination of reasonable seismic grade and compression ratio limited value of frame columns, the selection of bending moment and reinforcement calculation parameters of the floor, the consideration of adverse arrangement of live load, the determination of reinforcement details for the floor and the application of the checking method of antishedding in the code. Based on the practical engineering, the above problems were discussed and the corresponding design suggestions were given.
Keywords:flatplate floor; internal force analysis; reinforcement detail; antishedding
作者简介:逯晔,硕士,高级工程师,Email:luye0082@126.com。
参考文献
[1]GB 50011—2010建筑抗震设计规范[S].北京:中国建筑工业出版社, 2010.
[2]JGJ 3—2010高层建筑混凝土结构技术规程[S].北京:中国建筑工业出版社,2011.
[3]GBJ 130—90钢筋混凝土升板结构技术规范[S].北京:中国建筑工业出版社,1990.
[4]北京市建筑设计研究院. 建筑结构专业技术措施[M].北京:中国建筑工业出版社, 2007.
[5]全国民用建筑工程设计技术措施结构分册编写组. 全国民用建筑工程设计技术措施(结构)[M].北京:中国计划出版社, 2003.
[6]A H 尼尔逊(美).混凝土结构设计[M]. 过镇海,等译. 12版.北京:中国建筑工业出版社, 2003.
[7]ACI 318M\|11 Building code requirements for structural concrete and commentary[S].Detroit: American Concrete Institute, 2011.
[8]CECS 175:2004现浇混凝土空心楼盖结构技术规程[S].北京:中国计划出版社, 2004.
[9]朱聘儒.双向板无梁楼盖[M].北京:中国建筑工业出版社,1999.
[10]中国民用建筑工程设计技术措施(结构混凝土结构)[M].北京:中国计划出版社, 2012.
[11]中国有色工程有限公司.混凝土结构构造手册 [M].3版.北京:中国建筑工业出版社, 2003.
[12]中国有色工程有限公司.混凝土结构构造手册 [M].4版.北京:中国建筑工业出版社, 2012.
[13]许晶,逯晔,张林振,等.关于《建筑抗震设计规范》中几个问题的讨论[J].建筑结构,2012,42(S2):331332.