（1 广西大学土木工程学院， 南宁 530004； 2 广西防灾减灾与工程安全重点实验室， 南宁 530004）

［摘要］梁柱T形钢连接节点通过螺栓和T形钢把钢框架中的梁柱连接在一起，构造简单、受力明确、抗震性能优越，是一种刚劲的半刚性连接方式，但普通梁柱T形钢连接节点应用于高层建筑中仍存在刚度、强度不足的问题。通过试验和有限元数值模拟研究了普通梁柱T形钢连接节点的力学性能，从该节点的最薄弱部位着手，探讨了加强上部T形钢构造的六种方案：腹板增设一排抗剪螺栓、腹板与翼缘间设加劲肋、增加翼缘及腹板宽度、增加翼缘及腹板宽度同时增加翼缘横向螺栓数量、梁腹板与柱之间增设单腹板和双腹板连接角钢。数值分析结果表明，以上六种方案均能直接或间接地提高节点的弹性极限、初始刚度和极限承载力，但对最终的破坏模式影响较小。最后针对T形钢连接节点的构造加强方式提出了一些建议。

［关键词］梁柱T形钢连接节点； 极限承载力； 半刚性连接； 有限元模拟； 节点加强

中图分类号：TU391，TU392.1    文献标识码：A    文章编号：1002-848X(2015)03-0053-06

Study on mechanical property and strengthening method  of steel beamtocolumn Tstub connections

Li Xiumei1,2, Zhang Keshi1,2, Wang Tao1, Huang Haitang1, Zheng Xiaowei1

 (1 Institute of Civil Engineering, Guangxi University, Nanning 530004, China;

2 Guangxi Key Laboratory of Disaster Prevention and Engineering Safety， Nanning 530004， China）

Abstract:Steel beamtocolumn Tstub connections, which connects steel beams and columns in steel frame together through bolts and Tstub, is a kind of semirigid strong connection form with simple details, definite mechanical ways and well seismic performance. But the ordinary steel beamtocolumn Tstub connections used in highrise buildings still have problems of insufficient stiffness and strength. The mechanical properties of the steel beamtocolumn Tstub connections were studied through the test and finite element numerical simulation. The weakest part of the connection was focused and six schemes to strengthen upper Tstub details were discussed, including a row of shear bolts additionally provided in the web, stiffener arranged between the flange and web, increase of the width of the flange and web, increase of transverse bolts of the flange and web, and additionally provided connected angle steel on one side or both sides of the beam web to connect the column. The numerical analysis results show that the above six schemes can directly or indirectly improve the elastic limit, initial stiffness and ultimate bearing capacity of the connection, but has little effect on the final failure mode. Finally some suggestions on structural strengthening method of T\|stub connections were given.

Keywords:steel beamtocolumn Tstub connection; ultimate bearing capacity; semirigid connection; finite element numerical simulation; connection strengthening

*广西理工科学实验中心重点项目（LGZX201101）,广西教育厅项目（201012M5009）。

作者简介：李秀梅，博士，教授，Email: lixiumei_gx@126.com。

参考文献

［1］POPOV E P,  YANG T S,  CHANG S P. Design of steel MRF connections before and after 1994 Northridge earthquake［J］. Engineering Structures, 1998, 20(12): 10301038.

［2］Load and resistance factor design specification for structural steel buildings［S］. Chicago: American Institute of Steel Construction Inc., 1999.

［3］舒兴平,胡习兵. T型钢半刚性连接节点的承载力分析［J］. 钢结构, 2005, 20(81): 3540.

［4］舒兴平,胡习兵,熊嚁. 钢框架梁柱T型钢半刚性连接节点的性能研究［J］. 建筑结构, 2006, 36(8): 69.

［5］戴绍斌,黄俊,朱健. 钢框架T型钢连接节点的受力性能研究［J］. 工业建筑, 2005, 35(9): 9093.

［6］TAKHIROV S M,  POPOV E P. Bolted large seismic beamtocolumn connections part 2: numerical nonlinear analysis［J］. Engineering Structures, 2002, 24(12): 15351545.

［7］VAHID SABERI, MOHSEN GERAMI, ALI KHEYRODDIN. Comparison of bolted end plate and Tstub connection sensitivity to component thickness［J］. Journal of Constructional Steel Research, 2014,98(7): 134145.

［8］SWANSON J A,  KOKAN D S,  LEON R T. Advanced finite element modeling of bolted Tstub connection components［J］. Journal of Constructional Steel Research, 2002, 58(58): 10151031.

［9］李凤霞,布欣,王新武.剖分T型钢梁柱连接滞回性能研究［J］.建筑科学, 2010,26（5）:2832.

［10］宋晓光, 申成军, 郭兵.钢框架梁柱T型钢连接滞回性能的研究［J］.建筑钢结构进展, 2008，10（4）：1825.

［11］JONG WAN HU. Mechanical modeling of bolted Tstub connections under cyclic loads part I: stiffness modeling［J］. Journal of Constructional Steel Research, 2011, 67(11): 17101718.

［12］黄海棠.T型钢梁柱半刚性连接节点在静载作用下的极限承载性能研究［D］. 南宁：广西大学，2012.

［13］李泽森，李秀梅，郑晓伟，等. T形钢连接梁柱半刚性节点滞回性能试验研究与数值分析［J］. 建筑结构学报, 2014, 35(7): 6168.