- 摘 要
-
(长沙理工大学桥梁工程安全控制省部共建教育部重点实验室, 长沙 410004)
[摘要]以配斜筋锈蚀RC梁的剪压破坏为研究对象,基于转角软化桁架理论,视RC梁截面的剪力由剪压区的混凝土、箍筋和斜筋共同承担,考虑斜筋及锈蚀对梁抗剪承载力的影响,通过应力平衡方程、变形协调方程、材料的应力-应变方程并引进钢筋锈蚀修正系数,建立了配斜筋锈蚀RC梁的抗剪承载力公式。并将14根配斜筋锈蚀RC梁的理论计算值与试验值进行验证对比,结果表明理论计算值与试验值吻合较好,验证了该计算方法的有效性。
[关键词]桥梁工程; 转角软化桁架理论; 斜筋; 锈蚀; RC梁; 抗剪承载力
中图分类号:TU375 文献标识码:A 文章编号:1002-848X(2014)11-0077-06
Shear capacity calculation of corroded RC beams with diagonal reinforcement based on rotating angle softened truss theory
Wang Lei, He Bingtao, Zhang Xuhui, Zhang Jianren
(Key Laboratory of Bridge Engineering of Ministry of Education, Changsha University of Science and Technology, Changsha 410004, China)
Abstracts: Based on the rotating angle softened truss theory, the shear capacity of the corroded RC beams with diagonal reinforcement was taken as the study object. The shear capacity of RC beams was born by the concrete, stirrup and diagonal reinforcement in the shear-compression region. Considering the influence of the diagonal reinforcement and corrosion on the beam shear capacity, shear capacity formula of RC beams was established through the stress balance equation, deformation coordination equation, stress-strain equation of the RC beam as well as importing modified coefficient of reinforcement corrosion. Experimental values of fourteen corroded RC beams with diagonal reinforcement were compared with theoretical values and the results matched well, which validated the effectiveness of the method.
Keywords: bridge engineering; rotating angle softened truss theory; diagonal reinforcement; corrosion; reinforced concrete beam; shear capacity
*国家自然科学基金(50878031)。
作者简介:王磊,博士,教授,Email:leiwlei@hotmail.com。
参考文献
[1]徐善华,曾柯,牛荻涛.锈蚀钢筋混凝土受弯构件正截面承载力计算模型[J].建筑结构,2006,36(10):79-82.
[2]TAMER EL MAADDAWY, KHALED SOUDKI, TIMOTHY TOPPER. Analytical model to predict nonlinear flexural behavior of corroded reinforced concrete beams[J]. ACI Structural Journal, 2005,102(4):550-559.
[3]李强,牛荻涛,刘磊,等.箍筋锈蚀混凝土棱柱体试件轴心受压试验研究[J].建筑结构,2013,43(1):65-69.
[4]赵羽习,金伟良.锈蚀箍筋混凝土梁的抗剪承载力分析[J].浙江大学学报:工学版,2008,42(1):19-24.
[5]魏巍巍,贡金鑫.基于修正压力场理论的有腹筋钢筋混凝土受弯构件受剪计算[J].建筑结构学报,2011,32(5):135-140.
[6]张建仁,孙乐坤,马亚飞,等.基于MCFT 理论的配斜筋RC 梁抗剪承载力计算[J].公路交通科技, 2012,29(9):58-62.
[7]NIELSEN M P. On shear reinforcement in reinforced concrete beams[J].Bygningsstatiske Meddelelser, 1967, 38(2):33-58.
[8]LAMPERT P, THURLIMANN B. Torsion tests of reinforced concrete beams[J]. ACI Special Publication, 1969, 65(2):101-102.
[9]ELFGREN L. Reinforced concrete beams loaded in combined torsion of bending and shear[M]. Gotebory:Chalmers University of Technology, 1972.
[10]COLLINS M P. Torque-twist characteristics of reinforced concrete beams[J].Inelasticity and nonlinearity in structural concrete, 1973, 8:211-232.
[11]ROBINSON J R, DEMORIEUX J M. Essais de traction, compression sur modèles d′me de poutre en béton armé: compte rendu partiel[M]. Paris ANN ITBTP, 1968.
[12]VECCHIO F, COLLINS MP. Stress-strain characteristics of reinforced concrete in pure shear[J]. ACI Structural Journal,1981,83(2):211-225.
[13]VECCHIO F, CONLLINS M P. The response of reinforcd concrete to in-plane shear and normal stresses[D]. Toronto: University of Toronto, 1982.
[14]HSU T T C, MO Y L. Softening of concrete in low-rise shear walls[J].Structural Journal of the American Concrete Institute, 1985, 82(6):883-889.
[15]HSU T T C. Softening truss model theory for shear and torsion[J].Structural Journal of the[16]HSU T T C. Nonlinear analysis of concrete membrane elements[J].Structural Journal of the American Concrete Institute, 1991, 88(5):552-561.
[17]PANG X B, HSU T T C. Behavior of reinforced concrete membrane elements in shear[J].Structural Journal of the American Concrete Institute, 1995, 92(6):34-37.
[18]HSU T T C. Softening of concrete in torsional members-design recommendations[J].Structural Journal of the American Concrete Institute, 1985,82(4):443-452.
[19]张南,朱恒怡.基于桁架模型的钢筋混凝土梁剪压破坏承载力计算[J].江苏科技大学学报:自然科学版, 2012,34(2):21-26.
[20]惠云玲,林志伸,李荣.锈蚀钢筋性能试验研究分析[J].工业建筑,1997,27(6):10-13.
[21]PARK R,PAULAY T.高等钢筋混凝土[M].秦文钱,等译.重庆:重庆大学出版社,1985.