- 摘 要
-
(1 广西科技大学土木建筑工程学院,柳州 545006;2 河南省新开元路桥工程咨询有限公司,郑州 450016;3 青岛黄海学院,青岛 266427;4 广西建工集团第五建筑工程有限责任公司设计研究院,柳州 545001;5 湖北天一建筑设计有限公司,武汉 430061)
[摘要]利用摩阻锚固原理,设计并研究了一种用于加固钢结构的预应力碳纤维板夹片式锚具。结合实际施工过程确定理论分析过程,进而拟定锚具的关键尺寸,提出设计过程中关键问题的解决方法。受力分析、有限元模拟及试验研究表明,该锚具设计理论合理、施工方便,其成果能为钢结构加固提供一种有效的方法。
[关键词]预应力; CFRP板; 夹片式锚具; 有限元分析
中图分类号:TU391 文献标识码:A 文章编号:1002-848X(2014)11-0073-04
Design and experimental investigation of wedge-type anchorage for CFRP plates
Deng Langni1, Ji Shuai1, Zhang Peng1, Yu Tianwen2, Yang Baodong3, Ling Yaqing4, Nie Wei5
(1 College of Civil Engineering and Architecture, Guangxi University of Science and Technology, Liuzhou 545006, China; 2 Henan New Century Road and Bridge Engineering Consulting Co., Ltd., Zhengzhou 450016, China; 3 Qingdao Huanghai University, Qingdao 266427, China; 4 Guangxi No.5 Architectural Design & Research Institute, Liuzhou 545001, China; 5 Hubei Tianyi Architecture Design Co., Ltd., Wuhan 430061, China)
Abstract: A wedge-type anchorage for prestressed carbon fiber reinforced polymer (CFRP) plates for strengthening steel structures was designed and studied based on the principle of friction anchorage. The theoretical analysis process was determined from the construction process. The key dimensions were developed and the solutions of the key problems in design process were presented. Mechanical analysis, finite element simulation and experimental investigation indicate that the design theory of the anchorage is reasonable and the construction is convenient. The result can provide an effective method for strengthening steel structures.
Keywords: prestress; CFRP plate; wedge-type anchorage; finite element analysis
*国家自然科学基金项目(51108099,51168006)。
作者简介:邓朗妮,教授,博士,Email:langni666@126.com。
参考文献
[1]TAVAKKOLIZADEH M, SAADATMANESH H. Streng-thening of steel-concrete composite girders using carbon fiber reinforced polymer sheets [J]. Journal of Structural Engineering,2003,129(1):30-40.
[2]TAVAKKOLIZADEH M, SAADATMANESH H. Fatigue strength of steel girders strengthened with carbon fiber reinforced polymer patch [J]. Journal of Structural Engineering, 2003, 129(2):186-196.
[3]GB/T 21490—2008 结构加固修复用碳纤维片材[S].北京:中国标准出版社,2008.
[4]CAMPBELL T L, SHRIVE N G, SOUDKI K A, et al. Design and evaluation of a wedgetype anchor for FRP tendons [J].Canadian Journal of Civil Engineering, 2000, 27(5):985-992.
[5]朱万旭,黄颖,周红梅,等.一种碳纤维预应力筋锚具的试验研究[C]//第二届全国土木工程用纤维增强复合材料应用技术学会交流会论文集. 北京:清华大学出版社,2002:382-385.
[6]梁栋,方志,孙志刚.碳纤维筋夹片式锚具锚固性能的试验研究[J].建筑结构,2007,37(12):68-71.
[7]蒋田勇,方志.CFRP预应力筋夹片式锚具的试验研究[J].土木工程学报,2008,41(2):60-69.
[8]邓朗妮,燕柳斌,陈华,等.预应力CFRP板夹片式锚具的研制与试验研究[J].建筑技术,2009(11):1043-1045.
[9]孙训方,方孝淑,关来泰. 材料力学