（长江大学城市建设学院， 荆州 434023）

［摘要］为揭示非对称配钢型钢混凝土柱的受力特点和破坏机理，考虑剪跨比、轴压比、体积配箍率以及拉结筋等4个影响因素，对12个T形配钢型钢混凝土柱进行了水平低周往复荷载试验。对水平低周反复荷载和恒定轴向荷载作用下试件的受力过程和破坏特征进行了研究，结果表明：非对称配钢型钢混凝土柱具有较好的滞回性能和耗能性能，其破坏形态主要有弯曲破坏、剪切斜压破坏和剪切粘结破坏三类。通过实测型钢腹板和箍筋的荷载-应变滞回曲线，分析了试件在不同阶段的受力状态，基于破坏机理和力学分析推导了T形配钢型钢混凝土柱发生剪切斜压破坏和剪切粘结破坏时的受剪承载力计算公式，计算结果与实测值符合较好。

［关键词］型钢混凝土结构; T形配钢; 破坏机理; 受剪承载力

中图分类号：TU375.3        文献标识码：A        文章编号：1002-848X(2014)04-0030-05

Shear mechanism and bearing capacity study of steel reinforced concrete columns with unsymmetrical steel reinforcement

Zeng Lei, Zhou Qin, Wu Yuanyuan, Shi Feng

(School of Urban Construction, Yangtze University, Jingzhou 434023, China)

Abstract: To investigate mechanical characteristics and failure mechanism of steel reinforced concrete (SRC) columns with unsymmetrical steel reinforcement, 12 columns with T-shaped steel reinforcement were tested under low cyclic loads considering the influence of shear span ratio, axial compression ratio, stirrup ratio and presence of cross tie. Loading process and failure characteristics under low cyclic loads and constant axial loads were studied. It is shown that the columns have good hysteretic characteristics as well as dissipation capacity and the failure patterns of the SRC columns with unsymmetrical steel reinforcement contains bending failure, shear-bond failure and shear compression failure. Based on the analysis of the load-strain hysteretic curves of steel web and stirrups, different mechanism states of specimen in different stages were analyzed. And according to the mechanical analysis and failure mechanism results, the calculation formula of shear capacity was established under the modes of shear compression failure and shear-bond failure. The results of formulas agree well with the test data.

Keywords: steel reinforced concrete structure; T-shaped steel reinforcement; failure mechanism; shear capacity

*国家自然科学基金项目（51108041），湖北省高等学校优秀中青年科技创新团队计划项目(T201303)，湖北省自然科学基金项目（2011CDB009）。 

作者简介：曾磊，博士，副教授,Email:zenglei28@126.com。

参考文献

［1］聂建国, 陶慕轩, 黄远, 等. 钢-混凝土组合结构体系研究新进展［J］. 建筑结构学报, 2010, 31(6): 71-80.

［2］卢文胜, 韩建平, 吕西林, 等.法门寺合十舍利塔结构整体模型振动台试验研究［J］. 建筑结构学报, 2011, 32(3): 90-98.

［3］CHEN C, LIN N. Analytical model for predicting axial capacity and behavior of concrete encased steel composite  stub columns ［J］. Journal of Constructional Steel Research, 2006, 62(5): 424-433.

［4］ELGHAZOULI A Y, TREADWAY J. Inelastic behaviour of composite members under combined bending and axial loading ［J］. Journal of Constructional Steel Research, 2008, 64(9): 1008-1019.

［5］ELLOBODY EHAB, YOUNG BEN, LAM DENNIS. Eccentrically loaded concrete encased steel composite columns ［J］.Thin-walled Structures, 2011, 49(1): 53-65.

［6］CHARALAMPAKIS A E, KOUMOUSIS V K. Ultimate strength analysis of composite sections under biaxial bending and axial load ［J］. Advances in Engineering Software, 2008, 39(11): 923-936.

［7］DUNDAR C, TOKGOZ S, TANRIKULU A K, et al. Behaviour of reinforced and concrete-encased composite columns subjected to biaxial bending and axial load ［J］. Building and Environment, 2008, 43(6):1109-1120

［8］JGJ 138—2001钢骨混凝土组合结构技术规程［S］. 北京：中国建筑工业出版社，2001.

［9］YB 9082—2006 钢骨混凝土结构设计规程［S］. 北京：冶金工业出版社，2006.

［10］叶列平,方鄂华,周正海,等. 钢骨混凝土柱的轴压力限值［J］. 建筑结构学报,1997,18（5）:43-50，21.